CONTACT US AT 800-321-4726
MFR Part #: 0203
Samy's Part #: DYNA0203
This is a Dynalite AC Power Cord. It is 10 ft. long, grounded for use with 110-120VAC current. It fits all Dynalite power packs and monolights.
Availability: On Backorder
MFR Part #: HA6946P
Samy's Part #: HAMAHA6946P
The Hama Sub Mini to Male PC Sync Cord - 15' (4.5m) is a PC (Post Connection) Cord that connects a camera to a flash head, or monolight, enabling the flash to fire at the instant the shutter button is pressed. Many cameras do not have a PC terminal to connect this cord. If so, an additional Hot...
Availability: In Stock
MFR Part #: RS8517
Samy's Part #: S-009219
This is RPS Studio 16" Pocket Wizard 3.5mm to 2.5mm Mini Sync Cord
Availability: On Backorder
MFR Part #: PMPWMPCF
Samy's Part #: PARAPMPWMPCF
The Paramount PW-MPCF Adapter is a molded piece that features a female PC tip on one side, and a mini-phone plug on the other side. This will allow a sync cord ending in a male PC tip to connect to equipment with a Monophone socket.
Availability: In Stock
MFR Part #: RS8518
Samy's Part #: S-004870
These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
MFR Part #: 303518
Samy's Part #: PROF701237
MFR Part #: RS8512
Samy's Part #: S-004868
These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
MFR Part #: 103010
Samy's Part #: S-000536
Profoto Sync Cable for the D1 Monolight is a 16' (5 m) mini-plug (1/8 / 3.5 mm) to camera PC cord
Availability: In Stock
MFR Part #: 103001
Samy's Part #: PROF504301
Flashes can be triggered in several ways: via a synchro-cable connected to the camera, by a built-in photocell triggered by the flash from another unit, or by being interconnected to another flash via a Synchro Interconnection Cable. This cable must be used when "daisy-chaining" or wiring together...
MFR Part #: 330607
Samy's Part #: S-036737
With the Profoto B2 Air TTL Extension Cable connected, you can position the B2 Air TTL Off-Camera Flash another three meters away from the pack without compromising performance.
MFR Part #: FV120CORD
Samy's Part #: PHOTFV120CORD
The Starlite QL Power Cord (120v) fits the domestic model Starlite QL continuous light head. This product comes with each Starlite QL light head.
designed with heavy duty switch casing. 20A industrial grade, oversized, back-lit rocker switch. High-impact molded cover with sidewalls for optimum...
MFR Part #: 7901
Samy's Part #: HENS7901
The Hensel Extension Cable for EH Flash Heads adds 16.5' (5 m) of useful cable length between the EH Pro Mini and EH Pro Mini 1200 P flash heads and the Porty or Pro Mini 1200 AS power pack in use.
Features:
- For EH Pro Mini / EH Pro Mini 1200 P
Availability: In Stock
MFR Part #: 102511
Samy's Part #: PROF504317
A 16.4' (5M) AC power cord, grounded, designed to be used in Japanese 200V power outlets. Designed to fit the Profoto Acute Power Pack and Compact Monolight.
Features:
- Power Cable for 200V Japanese Outlet
- 16' (5m)
- Grounded
MFR Part #: W990560
Samy's Part #: WEIN990560
Safe Syncs Safely reduces any electronic flash source from up to 400 volts to less than 6 volts to the camera sync input. This is absolutely mandatory for all high end and digital cameras. Hot Shoe to Hot Shoe Safe Sync that also features professional heavy duty threaded PC high voltage input...
Availability: On Backorder
MFR Part #: E219
Samy's Part #: S-008677
50 ft. Heavy Duty Power Cord.
MFR Part #: 13205
Samy's Part #: SPEE13205
Speedotron Detachable Head Cable for 206VF - 20'. This is a replacement cable that is supplied with the Speedotron 206VF flash head.
MFR Part #: PMPWMH1
Samy's Part #: PARAPMPWMH1
This Paramount 16" straight Household Male to Male Miniphone sync cord enables firing of a strobe head or power pack that accepts a male household style plug, from a Pocket Wizard Radio Slave Receiver or transceiver.
MFR Part #: DL0433P
Samy's Part #: DOTLDL0433P
This is Dotline 15ft PC/AC Straight Sync Cord for Power Packs.
Availability: In Stock
MFR Part #: 102541
Samy's Part #: S-047704
The Profoto Power Cable for Pro Series and D4 Power Packs (U.S./Canada) is a replacement power cable for Pro-10, Pro-8, Pro-7 and D4 power packs. The cable is 5 meters (16 feet) long for distance use. The cable is made of high quality material to stand robust use for longer time.
Features:
MFR Part #: EL11088
Samy's Part #: S-052615
The Elinchrom PC to 3.5 mm Sync Cord (16 ft.) connects a camera or a flash meter with PC sync to any flash unit with a 3.5 mm sync plug. It is compatible with Style and D-Lite flash heads with Chic 1 and 2, Digital 1 and 2, and Digital RX 1200 and 2400 power packs as well as the Ranger Quadra...
Availability: On Backorder
MFR Part #: PMHPC1P
Samy's Part #: PARAPMHPC1P
This Paramount Cords Household to PC Male Straight Sync Cable (1 ft.) is a replacement cable that provides the necessary connection between power pack or monolight with a Female Household (2 prong) receptor, and a camera, or triggering device that has a female PC (post connection) terminal. The...
Availability: In Stock
MFR Part #: EL11125
Samy's Part #: S-016975
The Elinchrom 3.5mm to 6.3mm RCA Adapter allows you to connect the EL-Skyport Universal Receiver via 3.55mm to 3.5mm sync cord to flash units that have a 6.3mm sync socket.
MFR Part #: EL11122
Samy's Part #: S-016974
The Elinchrom EL-Skyport cable is 15.7" long and has a 3.5mm mono jack on each end to connect the EL-Skyport Universal Receiver to compatible flash units.
Features:
- Mini Plug to Mini Plug (3.5mm)
MFR Part #: 907027
Samy's Part #: S-045104
The Photogenic Sync Cable for MCD400R is specially designed for use with Matrix MCD400R Monolight. The Sync Cable for MCD400R is designed to connect a flash trigger receiver with PC socket to a strobe with a 3.5 mm socket. The cable is 13 feet long and flexible, for improved age and wear resistance,...
MFR Part #: HA6943P
Samy's Part #: HAMAHA6943P
A PC (Post Connection) Cord connects a camera to a flash head, or monolight, enabling the flash to fire at the instant the shutter button is pressed. Many cameras do not have a PC terminal to connect this cord. If so, an additional Hot Shoe Adapter must be used, to provide the necessary terminal.
MFR Part #: 0418
Samy's Part #: DYNA0418
Dyna-Lite 18' Extension Cable for Dyna-Lite Flash Heads
This 18' Head Extension Cable is for use with current heads and power packs. It lenghtens the distance between your pack and head by 18' (5.4 m). Other lengths are available.
This 18' Head Extension Cable is for use with current heads and power packs. It lenghtens the distance between your pack and head by 18' (5.4 m). Other lengths are available.
Availability: In Stock
MFR Part #: EL11120
Samy's Part #: S-043885
This Elinchrom Sync Cable for Skyport Radio Slave Transmitter (7.8 In.) enables to connect a camera or a flash meter with a PC sync to all remote triggers, such as the EL-Skyport transmitter Speed, with a 2.5mm sync plug.
Features:
- Sub-mini (2.5 mm) to PC
- Provides remote connectivity
Availability: In Stock
MFR Part #: 303519
Samy's Part #: PROF701238
32' Head extension cable Extension that works on both Pro-7A and Pro-7B packs and heads, as well as the ProB2 pack.
MFR Part #: E224
Samy's Part #: S-008676
MFR Part #: EL11002
Samy's Part #: S-015353
This Elinchrom 11.5 ft. Head Cable for Ranger Quadra is specifically designed for Elinchrom Ranger Quadra Head. The cable is perfect choice to operate your head away from power pack for outdoor shooting. The standard flashhead cable supplied with each RQ Flashhead is 8 ft. which is not sufficient...
MFR Part #: 13200
Samy's Part #: SPEE13200
This is a replacement 20' detatchable head cable, which is included with the purchase of a 202VF flash head.
MFR Part #: 919670
Samy's Part #: PHOG919670
The Photogenic Powerlight Trip Cord is a 15' sync cord for Photogenic or other brand lighting equipment with a standard 1/4” connector. Standard PC tip on other end.
MFR Part #: 14200
Samy's Part #: SPEE14200
This head extension cable will extend the length of the original cable by 25'. It fits the Black Line 206VF & 106 flash heads.
Availability: In Stock
MFR Part #: RS8514
Samy's Part #: S-004869
These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
MFR Part #: PMML
Samy's Part #: PARAPMML
The Paramount Cords Phono Plug to Male PC (10 ft. Straight) is used to connect your camera or triggering device with PC terminal to a strobe unit with a 1/4" monoplug socket. The cord is made of high quality material for long life and optimum results.
Features:
- Connects triggering device to
Availability: In Stock
MFR Part #: PMMLHFHD
Samy's Part #: PARAPMMLHFHD
All Paramount straight cords are heavy duty and maintain a "like new" appearance throughout years of use. The Paramount Cords 1/4 In. Monolite Plug to Household Female Sync Cord (15 ft. Straight) is used to extend the cable length for strobe lights that accept the monolite plug. The plug fits...
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE