Newsletter Icon
Rewards Program
Ebay Icon
Used Equipment
Leasing
CONTACT US AT 800-321-4726
Lens Hoods
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Lee Filters
MFR Part #: WALH
Samy's Part #: LEEWALH

Lee Wide Angle Lens Hoods have much larger bellows to allow for effective shading on wide or particularly large lenses, where the use of standard hoods could cause vignetting. They fit directly onto the lens via an adaptor ring, or onto the filter holder. The wide angle hood is available in standard...
$27500
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Dot Line
MFR Part #: DL0468P
Samy's Part #: DOTLDL0468P

Black rubber lens hood is collapsible. Folds back over lens for storage. Inside front thread allows for filters or accessories to be attached.
Availability: In Stock
$599
QTY
Promaster
MFR Part #: 4155
Samy's Part #: S-046189

The Promaster 52mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
QTY
Sigma
MFR Part #: AH6001
Samy's Part #: S-033068

The Sigma LH4-01 Lens Hood blocks out extraneous light and reduces flare and ghosting. It easily attaches to the front of the lens with a bayonet mount and also provides additional protection to the lens from accidental impacts, bumps and scratching.

Features:
  • For Sigma dp2 Quattro Digital
...
Availability: In Stock
$1900
QTY
Canon
MFR Part #: 2681A001
Samy's Part #: CANO2681A002
Availability: In Stock
$4695
QTY
Sony
MFR Part #: ALCSH131
Samy's Part #: S-060854

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.


Compatible with:

Sony Sonnar
...
Availability: In Stock
$3600
QTY
Canon
MFR Part #: 2655A001
Samy's Part #: CANO2655A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
$2299
QTY
Canon
MFR Part #: 8268B001
Samy's Part #: S-024317
The Canon EW-63C Lens Hood for EF-S 18-55mm f/3.5-5.6 IS STM Lens is designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs.
Availability: In Stock
$2288
QTY
Fujifilm
MFR Part #: 16144523
Samy's Part #: S-011376

The LH-X100 Lens Hood with Adapter Ring from Fuji is for the X100 camera. This metal adapter ring replaces the lens ring that comes with the camera and bayonet mounts with the lens hood. In addition to bayoneting with the hood, it can also be used for mounting 49mm filters.

The metal lens hood...
Availability: In Stock
$6999
QTY
Nikon
MFR Part #: 566
Samy's Part #: NIKO566

A lens hood is an essential part of your Nikon system. When the rays from a strong light source, such as the sun, strike the front surface of your lens at a shallow angle, they cause flare which can rob your photos of contrast and color saturation.

Lens hoods act to reduce stray light and...
$2195
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Nikon
MFR Part #: 4922
Samy's Part #: NIKO4922

Replacement HB-40 Bayonet Lens Hood for AF-S NIKKOR 24-70mm f/2.8G ED lens hood.
Availability: In Stock
$2995
QTY
Nikon
MFR Part #: 4611
Samy's Part #: NIKO4611

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

Dedicated lens hoods are

...
Availability: In Stock
QTY
Notice: This item is non-returnable
Nikon
MFR Part #: 4976
Samy's Part #: S-015910

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection
...
Availability: In Stock
$3995
QTY
Notice: This item is non-returnable
Promaster
MFR Part #: 2580
Samy's Part #: S-046210

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 62mm Wide Angle Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting...
Availability: In Stock
$995
QTY
Promaster
MFR Part #: 2538
Samy's Part #: S-046201

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster 72mm Universal Rubber Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$199
QTY
16x9 Inc
MFR Part #: 169-HU-110-S
Samy's Part #: S-013402

The 16x9 Inc. 110mm Rubber Lens Shade is a broadcast-style shade designed to work with the EXII 0.6x wide angle converter. Using a quick-lock mechanism and a comprehensive 110mm step-ring adapter to slide onto lenses of varying diameter, the shade prevents stray light from hitting the lens...
$17900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Nikon
MFR Part #: 4203
Samy's Part #: S-058721

Dedicated to the
Nikon AF-S NIKKOR 500mm f/5.6E PF ED VR lens, the Nikon HB-84 Lens Hood helps to minimize flare by deflecting stray light from entering the lens. The hood also provides additional protection to the lens from accidental impacts, bumps, or scratching. It is offered here as a spare...
Availability: In Stock
$6995
QTY
Promaster
MFR Part #: 4926
Samy's Part #: S-046099

Using a lens hood prevents light from hitting the front lens element from the sides, thereby reducing contrast and creating flare. The Promaster EW-52 Replacement Lens Hood provides excellent protection from bumps and nudges on front of your lens and helps to minimize flare by deflecting stray...
Availability: In Stock
$4295
QTY
Canon
MFR Part #: 1693B001
Samy's Part #: CANO1693B001

The Canon ES-78 Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the hood is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: In Stock
$3900
QTY
Canon
MFR Part #: 2702A001
Samy's Part #: S-047510

The Canon EW-83DII Lens Hood designed to prevent stray light from entering the lens, in order to keep unwanted glare from affecting your photographs. The hood is specifically designed for the EF 24mm f/1.4L lens.

Features:
  • Prevent stray light from entering the lens
  • Designed specifically for
...
Availability: In Stock
$4495
QTY
Nikon
MFR Part #: 4994
Samy's Part #: S-031215

The Nikon HB-69 Bayonet Lens Hood is designed to keep flare from entering the lens, when shooting. It minimizes stray light and reduces lens flare.

Compatible With: AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II Lens
Availability: In Stock
$2295
QTY
Nikon
MFR Part #: 4958
Samy's Part #: S-007649

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
Availability: On Backorder
$4195
QTY
Promaster
MFR Part #: 4162
Samy's Part #: S-046190

The Promaster 55mm Universal Lens Hood is specially designed for the wide focal lengths required by today's digital SLR cameras. Its "petal" shape design is instrumental in helping to reduce glare while minimizing the potential for vignetting of your image. The unique two-piece design of this...
Availability: In Stock
$1995
QTY
Nikon
MFR Part #: 4991
Samy's Part #: S-028496

The Nikon HB-68 Bayonet Lens Hood minimizes stray light and reduces lens flare and comes with the AF-S NIKKOR 58mm f/1.4G lens, and is designed to keep flare from entering the lens, when shooting. It is also available as a replacement item.
Availability: In Stock
$3295
QTY
Canon
MFR Part #: 2654A001
Samy's Part #: CANO2654A002

Lens Hood ES-65 III for TS-E 90mm Lens
Canon
MFR Part #: 2698A001
Samy's Part #: CANO2698A002

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Nikon
MFR Part #: 4988
Samy's Part #: S-033722

The Nikon HB-65 Bayonet Lens Hood is a snap-on lens hood designed to protect specific NIKKOR lenses from flare while shooting. The hood is compatible with AF-S NIKKOR 80-400mm f/4.5-5.6G ED VR. The "petal" shape of this snap-on lens hood maximizes the amount of hood coverage for the minimum amount...
Canon
MFR Part #: 0776B001
Samy's Part #: CANO0776B001

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front...
Availability: In Stock
$4377
QTY
Canon
MFR Part #: 0575C001
Samy's Part #: S-038651

The ES-68 Lens Hood from Canon is designed to fit the Canon EF 50mm f/1.8 STM Lens. Lens hoods offer protection from unwanted light entering your lens and causing glare, especially when shooting toward your light source. They also offer a degree of physical protection for your lens against...
Availability: In Stock
$2495
QTY
Nikon
MFR Part #: 4125
Samy's Part #: NIKO4125

Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

The "petal" shape of this lens...
Availability: In Stock
$1295
QTY
Dot Line
MFR Part #: DL-2182
Samy's Part #: S-043120

The "petal" shape of the Dot Line 82mm Snap-On Lens Hood maximizes the amount of hood coverage with the minimum amount of weight and hood area. In addition, the design of this hood allows it to be reversed and stored on the lens, when not in use. It is also designed to accept lens caps.

Lens...
Availability: In Stock
$2399
QTY
Phottix
MFR Part #: PH50570
Samy's Part #: S-024697

The Phottix EW-78D Lens Hood provides the ultimate protection. Manufactured from non breakable plastic. Substitute for Canon EW-78D lens hood, which is designed for Canon EF 28-200mm USM and 18-200mm IS.

Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$700
QTY
Canon
MFR Part #: 2964C001
Samy's Part #: S-060345

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from
...
Availability: In Stock
$6995
QTY
Canon
MFR Part #: 9529B001
Samy's Part #: S-032396

The Canon EW-73C Lens Hood For 10-18 mm STM Lens is especially designed for the Canon EF-S 10-18mm f/4.5-5.6 IS STM lens and minimizes flare by deflecting stray light from entering lens. It provides protection to the lens from accidental impacts, bumps, and scratching.

Features:
  • For EF-S 10-18mm
...
Availability: In Stock
$2795
QTY
Canon
MFR Part #: 5185B001
Samy's Part #: S-022225

Hoods offer several benefits to the photographer. The Canon EW-72 Lens Hood for EF 35mm f/2.0 IS USM Lens shades the lens from stray light that may result in an unwanted discoloration or hazing of the image, or the appearance of lens flare. Shading your lens helps improve contrast and image quality....
Availability: In Stock
$5400
QTY
Canon
MFR Part #: 6319B001
Samy's Part #: S-019771

The Canon EW-54 Lens Hood for EF-M
EF-M 18-55mm IS STM Lens is a shade for the EF-M 18-55mm IS STM Lens, which is compatible with Canon's EOS-M mirrorless digital camera. It prevents stray light from entering the lens, thus reducing glare and lens flare for better visibility and image
...
Availability: In Stock
$2900
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]