CONTACT US AT 800-321-4726
MFR Part #: CC-WIDETONE65
Samy's Part #: S-051362
Savage strives to ensure color accuracy and customer satisfaction for all Seamless Paper Backgrounds. Since monitors are calibrated differently from user to user, occasionally some variations may occur when viewing color swatches online. For that reason, we offer Savage Color Chart for Background...
Availability: In Stock
MFR Part #: RS2024
Samy's Part #: S-022023
The RPS Studio Background Wall Mount is a heavy duty background holder made of metal and mounts to wall studs or ceiling joists. Arms are 1-5/8 In. wide and vary in length from approximately 5-1/2 In. to 8 In. long to allow background material to easily move up and down. Overall length of the...
MFR Part #: 046MCR
Samy's Part #: S-027441
The Manfrotto Expan Drive Set with Red Metal Chainenables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: On Backorder
MFR Part #: PP173
Samy's Part #: S-042475
The Mole Richardson 28 x 44 In. Sheet Showcard (Shiney Silver) is perfect for Manipulating Light. It is used as a hard bounce to remove any Unwanted Reflections.
Availability: In-Store Only
MFR Part #: RS2011
Samy's Part #: DOTLRS2011
Extends the width of the basic unit 144" to accommodate rolls up to 12' in width. 1 required for each roll.
MFR Part #: 272B
Samy's Part #: MANF272B
MFR Part #: 0622
Samy's Part #: MANF0622
Counterweight for background paper in 2 sections.
MFR Part #: 046MCB
Samy's Part #: S-027439
The Manfrotto Expan Drive Set with Black Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the...
Availability: In Stock
MFR Part #: LB1121
Samy's Part #: S-031859
This Lastolite Magnetic Background Support Kit includes the Magnetic Background Support and a lighting stand which when combined will offer everything needed to support a collapsible background with a steel rim. An innovative magnetic background support which enables photographers to quickly and...
Availability: In Stock
MFR Part #: 0473
Samy's Part #: MANF0473
The Alu-Core allows you to use the Expan system with uncored paper or cloth backgrounds. It consists of two aluminum sections which interlock by means of a joining casting. The Expans are inserted into the Alu-Core and provide a core for background rolls.
This ALu-Core is 12 ft (3.6 M)long,...
Availability: On Backorder
MFR Part #: PP107
Samy's Part #: S-042474
The Mole Richardson 32 x 40 In. Sheet Showcard (Black/White) is perfect for Manipulating Light. White will Bounce the Light, Black will help remove any Unwanted Reflections.
Availability: In-Store Only
MFR Part #: 0472
Samy's Part #: MANF0472
Aluminum core in 2 sections: 50mm diameter for uncored background paper. Designed to accept Expan Drives. Includes double-sided tape to hold paper. Length: 108.3" (9 feet)
* Replaces item # 2922
MFR Part #: 032B
Samy's Part #: S-034904
The Manfrotto 032B Single Autopole (Black) single action locking cam Autopole mounts between the floor and ceiling of a studio.
Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, Hooks, and crossbars. Autopole extends from 210cm to 370cm. The cantilever system...
MFR Part #: RS2014
Samy's Part #: DOTLRS2014
Extra crossbar for all stands allows additional rolls to be added. Each crossbar extends from 4-1/2 to 10 foot in legnth. 28mm in diameter.
Availability: On Backorder
MFR Part #: PP131
Samy's Part #: S-042478
The Mole Richardson 28 x 44 In. Sheet Showcard (Smooth Silver Matte) is perfect for Manipulating Light. A reflection medium helps to remove any Unwanted Reflections.
Availability: In-Store Only
MFR Part #: 045
Samy's Part #: MANF045
Set of two background paper holders for three Expan 046. Can be fixed to a wall with supplied studs and screws, or to Super Clamp 035 by means of supplied screw set.
* Replaces item # 2921
Availability: In Stock
MFR Part #: 046MCG
Samy's Part #: S-027440
The Manfrotto Expan Drive Set with Grey Metal Chain enables raising and lowering background paper without lowering the support stands. It uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8 to 3 inches to grip the roll....
Availability: In Stock
MFR Part #: 9017
Samy's Part #: WESC9017
The Wescott Cross Bar with Clips allows the Background Support System (sold separately) to display additional backgrounds. The Cross Bar adjusts from 7 feet to 10.5 feet. When used with the Background Support System, a second background can be supported by positioning directly below the initial...
Availability: In Stock
MFR Part #: YBPDBLACK
Samy's Part #: S-034606
The Phototools Background Paper Drive Set with Chain enables the raising and lowering of background paper without lowering the support stands. The paper drive set uses two expandable technopolymer inserts to support a single roll of seamless paper. Each side expands the drive inserts from 1.8...
Availability: In Stock
MFR Part #: 059WM
Samy's Part #: MANF059WM
Wall mount background paper holder set for one Expan 2920. Comes complete with screw set for mounting to wall studs. Weight 1.2 lbs
Availability: In Stock
MFR Part #: LB1120
Samy's Part #: S-031858
The Lastolite Magnetic Background Support (24.8 In.) is an innovative support which enables photographers to quickly and easily attach any collapsible backgrounds with a steel rim to a traditional lighting stand.
Features:
- Easily attach any collapsible backgrounds with a steel rim
- Reliable
Availability: In Stock
MFR Part #: 091MCR
Samy's Part #: MANF091MCR
The Manfrotto Expan Drive Metal Chain is a replacement red chain. Metal beats plastic for strength and longevity, as far as Expan Drive chains go. It is 11.5' (3.5 m) long. Can replace plastic chain on Expan 046.
Length - 137.79in. (3.5m)
Weight - 1.32lbs.
Material - technopolymer
Color...
MFR Part #: 094
Samy's Part #: MANF094
Provides weight to keep Expan chain tight.
* Replaces item # 2925
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE