CONTACT US AT 800-321-4726
MFR Part #: YFPF110110
Samy's Part #: S-043796
Availability: In Stock
MFR Part #: 1957
Samy's Part #: S-031826
The Westcott Fast Flags Scrim Kit (24x36 In.) is used to quickly diffuse light on set by 2 full stops. Shape or subtract light on set using this heavy-duty black block. A well-equipped Fast Flags Scrim Kit consists of an assortment of 24x36" light diminishing Flags and Diffusion Fabrics in a storage...
Availability: On Backorder
MFR Part #: 149566
Samy's Part #: MATT149566
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
MFR Part #: 999003
Samy's Part #: S-000723
This Matthews Dot & Finger Survival Kit is a comprehensive kit able to solve almost any field or studio problem to Shape, soften or diminish the light from your fixtures. The Dot & Finger Survival Kit contains: 2--Dot 3 In. Single Black, 2--Dot 6 In. Single Black, 2--Dot 10 In. Single Black, 2--Dot...
MFR Part #: 1937
Samy's Part #: S-044590
The Westcott Fast Flags Scrim Kit (18x24 In.) is used to quickly diffuse light on set by 2 full stops. Shape or subtract light on set using this heavy-duty black block. A well-equipped Fast Flags Scrim Kit consists of an assortment of 18 x 24" light diminishing Flags and Diffusion Fabrics in a...
Availability: On Backorder
MFR Part #: 169001
Samy's Part #: MATT169001
The Matthews 30x36 In. Flag use only a single, horizontally angled support arm which allows for 'close-in', right angle, tight positioning over set walls and interlocking of flags to establish a tightly controlled spread of light. The flags are used to control natural or artificial light beside...
MFR Part #: 159015
Samy's Part #: MATT159015
Please Note: This item ships freight only
The Matthews Solid Frame Scrim White Artificial Silk (48x48 In.) is a handy accessory to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames...
Availability: In Stock
MFR Part #: 169029
Samy's Part #: S-003451
Cutters are square or rectangular frames with mounting pins attached used to control natural or artificial light. The Matthews 24x72 In. Floppy Cutter is used to keep away flash light from the camera lens or to control spill light coming from other sources and to keep light from reaching certain...
MFR Part #: 319000
Samy's Part #: MATT319000
Availability: In Stock
MFR Part #: 169062
Samy's Part #: MATT169062
The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
MFR Part #: 999004
Samy's Part #: MATT999004
The Matthews Hollywood C+ Survival Kit contains the 2x C+ Stands, 2x Adapters 1x1/8" to 5/8", 2x Hollywood 2x1/2" Grip Heads, 2x Hollywood 40" Gobo Arms, 4x Matthbags, 2x12"x18" Flags,2x12"x18" Single Scrim Black, 2x12"x18" Double Scrim Black, 2x12"x18" Artificial Silk Diffuser, 1 Carrying Case. The term ‘Century Stand’ goes...
Availability: In Stock
MFR Part #: 350595
Samy's Part #: MATT350595
Matthews Road Rags are a portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: In Stock
MFR Part #: 350596
Samy's Part #: MATT350596
Matthews Road Rags are portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: In Stock
MFR Part #: 319089
Samy's Part #: MATT319089
Availability: In Stock
MFR Part #: 149061
Samy's Part #: MATT149061
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
MFR Part #: 319403
Samy's Part #: MATT319403
Availability: In Stock
MFR Part #: 169028B
Samy's Part #: MATT169028B
Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new Matthews 48x48 In. Floppy Cutter Bottom Hinge (Opens to 48x90 In.), there are now three...
Availability: In Stock
MFR Part #: 169191
Samy's Part #: S-003706
The Matthews RoadRags II Scrim Frame (24 x 36 In.) has an elastic corded frames easily fold for storing and transporting. It is the new portable lighting systems that allows to quickly and easily duplicate studio lighting effects on location using portable lights. It consists of two folding 18"x24"...
MFR Part #: 999013
Samy's Part #: MATT999013
The Matthews 24x36" Lighting Control Kit includes 24x36" Single Scrim (Black), 24x36" Double Scrim, 24x36" Artificial Silk, 24x36" Flag, 24x36" Cello Cucoloris, 24x36" Wood Cucoloris and Carrying Bag. Lighting Control Carrying Bag is made of 1000 denier polyester fabric exterior shell with heavy...
MFR Part #: 149043
Samy's Part #: MATT149043
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
MFR Part #: 169042
Samy's Part #: MATT169042
The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
MFR Part #: D255
Samy's Part #: LOWED255
Half Scrim for DP Light covers half the light, rotates 360 degree to reduce light on any part of the subject that is too bright.
Availability: In Stock
MFR Part #: 169067
Samy's Part #: MATT169067
The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
MFR Part #: 209641
Samy's Part #: MATT209641
MFR Part #: 169010
Samy's Part #: MATT169010
The Matthews Flag (24x30 In.) is used to protect the camera lens from flares or to control spill light from other sources, or to keep light from reaching certain areas on the set. The newly designed 90 deg. Flag will make it possible to position the instrument over the top of the set wall or to...
MFR Part #: 149063
Samy's Part #: MATT149063
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
MFR Part #: 149052
Samy's Part #: MATT149052
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
MFR Part #: 159013
Samy's Part #: MATT159013
Please Note: This item ships freight only
To keep weight to a minimum and yet get maximum strength, the Matthews 48x48 In. Solid Frame Scrim (Black Single) is made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews...
MFR Part #: 149066
Samy's Part #: MATT149066
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: On Backorder
MFR Part #: 622005
Samy's Part #: MATT622005
The Matthews Combo Scrim and Flag Kit is a compact light-shaping kit that includes 18 x 24 inches and 24 x 36 inches light shaping scrims and flags of different thickness. The light scrims soften and diminish light output for professional requirements.
Features:
- Scrims softens light output.
MFR Part #: 999027
Samy's Part #: MATT999027
Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter ROADFLAGS offers larger surfaced, (4' x 4' - 122cm x 122cm) lighting modification in a convenient, easy-to-use protable kit. The...
MFR Part #: 309083
Samy's Part #: MATT309083
MFR Part #: L20005105
Samy's Part #: ARRI531252
This scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.
Availability: In Stock
MFR Part #: L20005103
Samy's Part #: ARRI531250
This scrim covers the entire lightface and reduces the intensity of the entire light beam.
MFR Part #: 149058
Samy's Part #: MATT149058
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the...
Availability: In Stock
MFR Part #: 309084
Samy's Part #: MATT309084
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE