CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Rode Microphones
MFR Part #: DEADCATVMP+
Samy's Part #: S-057167


The Rode DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed for use in windy environments.

Designed to reduce wind noise when recording outdoors, the DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber

...
Availability: More In Transit
$3900
QTY
Rode Microphones
MFR Part #: INVISILAV10PK
Samy's Part #: S-030629

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
Ships next business day
$4000
QTY
PSC
MFR Part #: SMIS0030F
Samy's Part #: PSCPSMIS0030F

Plastic exterior filled with foam to stay on the microphone. Each side measures 3-5/8” x 2-1/16”.
Availability: In Stock
Ships next business day
$2995
QTY
Leica
MFR Part #: 16067
Samy's Part #: S-046864

The Leica AA-SCL4 Audio Adapter provides 3.5 mm jack sockets for headphones and a remote microphone. Using a single dedicated connection to the camera, this adapter enables the use of both headphones and an external microphone via 3.5mm jack sockets.

Features:
  • Provides 3.5 mm jack sockets for
...
Availability: More In Transit
$19500
QTY
Notice: This item is non-returnable
Rode Microphones
MFR Part #: DEADCATGO
Samy's Part #: S-031857

The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining...
Availability: In Stock
Ships next business day
$2995
QTY
Rode Microphones
MFR Part #: SC6L
Samy's Part #: S-058519

The Rode Microphones SC6-L Mobile Interface for iOS Devices and Compatible Microphones is a simple input/output breakout box designed for Apple iOS devices. Inspired by the original SC6 with a 3.5mm TRRS jack, the SC6-L uses a Lightning Connector to connect directly to Apple iOS devices.

With two...
Availability: In Stock
Ships next business day
$7900
QTY
Rode Microphones
MFR Part #: MICROBOOMPOLEPRO
Samy's Part #: S-041711

The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.

Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length...
Availability: In Stock
Ships next business day
$9900
QTY
Audio-Technica
MFR Part #: AT8410A
Samy's Part #: AUDIAT8410A

The Audio-Technica Shock Mount - Spring Loaded fits with Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, S11, SG1, SG2, SG3, SG4, T1, T2, T3, T4, T5, T6, T7

Features:
  • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
  • Spring-clip fits most
...
Availability: Special Order
$4900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
K-Tek
MFR Part #: KE89CC
Samy's Part #: KTEKKE89CC

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (7.5 ft.) has a collapsed length of 2.5 feet (74cm) and an extended length of 7.6 feet (218cm) with only weight of 1.375 lbs (624g). This 4-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
Ships next business day
$18525
QTY
Rode Microphones
MFR Part #: INVISILAV3PK
Samy's Part #: S-030628

The Rode Microphones invisiLav Discreet Lavalier Mounting System is designed to conceal your lavalier or Rode smartLav microphones while reducing handling noise and vibrations. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and...
Availability: In Stock
Ships next business day
$1800
QTY
Rycote
MFR Part #: 037701
Samy's Part #: RYCO037701

This Rycote Hot Shoe Extension/Extender (20 cm) lets you fit more than one hot attachment onto your equipment.
Availability: In Stock
$4200
QTY
JuicedLink
MFR Part #: RB200
Samy's Part #: S-023440

The Riggy Cold Shoe Top Mounting Kit by its manufacturer JuicedLink, is an entire kit with everything you need to mount your Riggy-Micro to the hot-shoe of your camera (not designed for the Riggy-Assist). It inlcludes 2 RB101 cold shoe mounts which attach to the Riggy receptacles on the top and...
Availability: In Stock
$4900
QTY
Rode Microphones
MFR Part #: DEADCAT
Samy's Part #: RODMDEADCAT

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed to minimise wind noise while remaining acoustically transparent.

Compatible with the following microphones :
  • NTG-1
...
Availability: In Stock
Ships next business day
$3900
QTY
Saramonic
MFR Part #: SRVML5B
Samy's Part #: S-061282

The Saramonic SR-VML5B is rechargeable Li-ion battery for the VmicLink5 and VmicLink5 HiFi Wireless Microphone Systems transmitters and receivers. Perfect to having extra batteries at the ready for longer shoots and productions
Availability: In Stock
Ships next business day
$2500
QTY
Rode Microphones
MFR Part #: BLIMP
Samy's Part #: RODMBLIMP

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG-1, NTG-2 and NTG-3 microphones, as well as any third party shotgun microphone up to 325mm in length.

FEATURES:
  • Greatly reduces handling and wind noise
  • Accomodates most shotgun micr
...
Availability: In Stock
Ships next business day
$29900
QTY
K-Tek
MFR Part #: KTADL
Samy's Part #: S-011230

The K-Tek Tadpole Short Camera And Accessory Mounting Pole (3 ft.) is an ideal, lightweight solution for mounting small cameras such as the GoPro or Zoom Q3HD, or handheld Audio recorders like the Zoom H1 or Tascam DAP1. The pole has added flexibility of a ball and socket joint at the top to help...
Availability: In Stock
$5900
QTY
Saramonic
MFR Part #: SRHM7WS2
Samy's Part #: S-065064

The 
Saramonic SR-HM7-WS2 Fitted Foam Windscreen for SR-HM7 Microphone (Set of 2) is a set of two fitted foam windscreens designed specifically for the Saramonic SR-HM7, SR-HM7 DI, and SR-HM7 UC handheld microphones. The windscreen shape makes it compatible with most ball-shaped mic heads up to...
Availability: In Stock
Ships next business day
$1200
QTY
Kupo
MFR Part #: KG012212
Samy's Part #: S-054258

The Kupo Microphone Screw Adapter 3/8" Female to 5/8" Male is ideal for placing microphone mounts onto light stands, tripods or any device with a 3/8"-16 male thread.

Features:
  • Mount Standard 5/8"-27M Equipment
  • Provides Female 3/8"-16 Connector
  • Mount a Mic to a Light Stand or Similar
Availability: In Stock
Ships next business day
$399
QTY
Saramonic
MFR Part #: VMICWSS
Samy's Part #: S-065067

The Sarasmonic Furry Windscreen for VMIC Stereo is a furry windscreen for higher wind conditions, when the foam windscreen just won’t do. Designed for the Saramonic Vmic Stereo, it is an ideal solution to get the best quality sound in high-wind recording environments.
Availability: In Stock
Ships next business day
$2500
QTY
Rode Microphones
MFR Part #: WS6
Samy's Part #: RODMWS6

The Rode WS6 Deluxe Wind Screen is designed to reduce wind noise when recording in adverse environmental conditions.

Suitable for the Rode NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.

COMPATIBLE...
Availability: In Stock
Ships next business day
$5900
QTY
Rode Microphones
MFR Part #: MICROBOOMPOLE
Samy's Part #: S-012166

The Micro Boompole from Rode is a convenient and portable, 3-piece boom pole. Lightweight and precision balanced, the anodized aluminium pole features intuitive twist locks for smooth extension. Compatible Microphones: NTG-1, NTG-2, NTG-3, NT4, NT5, NT55, M3, VideoMic, Stereo VideoMic, VideoMic...
Availability: In Stock
Ships next business day
$4900
QTY
Sennheiser
MFR Part #: MZW400
Samy's Part #: SENNMZW400

The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Availability: In Stock
Ships next business day
$3995
QTY
Rode Microphones
MFR Part #: MINIFURLAV
Samy's Part #: S-015370

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three.
Availability: In Stock
Ships next business day
$2499
QTY
Saramonic
MFR Part #: SMARTRIGUC
Samy's Part #: S-061263

Designed for people who require one audio input and little fuss, the
Saramonic SmartRig UC Single-Channel Interface for USB Type-C Devices is an interface that connects a microphone or instrument to a digital device with a USB Type-C connector. It accepts XLR or 1/4" connections by means of its...
Availability: In Stock
$11900
QTY
Dinkum Systems
MFR Part #: 3013
Samy's Part #: S-021087

The Dinkum Systems FlexiMount is a quick-clamping microphone mount with a strong base and 9-link, 11” long arm, which may be accurately positioned for optimum audio results. It’s the perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go po...
Availability: Special Order
Rode Microphones
MFR Part #: SM6
Samy's Part #: S-030819

The Rode's SM6 Shock Mount with Detachable Pop Filter is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

It includes a removable pop shield...
Availability: Special Order
$5900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
K-Tek
MFR Part #: KE110
Samy's Part #: KTEKKE110

This K-Tek Avalon Series Aluminum Boompole (Uncabled) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.458 lbs (661g). This 5-section Aluminum Boompole is uncabled. The top attachment is a 3/8″ - 16 male thread and the bottom attachment...
Availability: In Stock
Ships next business day
$20520
QTY
Saramonic
MFR Part #: SRUM10MC1
Samy's Part #: S-061280


The Saramonic SR-UM10-MC1 is a replacement shoe mount adapter for the receiver of the UwMic9, VmicLink5, UwMic10 and UwMic15 wireless systems. It features a quick-release design for easy attachment and removal and mounts to the SR-UM10-MC2 belt clip that is included with the UwMic9, VmicLink5,

...
Availability: In Stock
Ships next business day
$1500
QTY
Saramonic
MFR Part #: TMWS7
Samy's Part #: S-065065

The Saramonic TM-WS7 Furry Outdoor Microphone Windscreen
is designed to fit the Saramonic SR-TM7 microphone (sold separately). The furry windscreen's easy slip-on design can be used to reduce noise caused by windy conditions in the field and vocal plosives when singing or speaking. In addition,...
Availability: More In Transit
$3900
QTY
Calrad
MFR Part #: 10-31
Samy's Part #: S-031771

The Calrad Microphone Stand (Black) has a black stem with 3/8 - 16 thread connector and detachable 5/8" - 27 screw adapters for microphone holder. The base is round shaped with stability on the table top. The stand can extend up to the height of 64 inches and closed height is 35 inches. The stand...
Availability: In Stock
Ships next business day
$4860
QTY
Rode Microphones
MFR Part #: MINIBOOMPOLE
Samy's Part #: RODMMINIBOOM

The RØDE Mini-Boompole is a lightweight, high grade professional boom pole. The Mini-Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.

  • lightweight aluminium construction

...
Availability: In Stock
Ships next business day
$12900
QTY
Audio-Technica
MFR Part #: AT8691
Samy's Part #: S-044847

The Audio-Technica Camera Shoe Dual Mount for ATW-R1700 Digital Wireless Receiver makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera's hot shoe, or to a tripod or other device with a ¼" screw. Comes with 280 mm (11.0") AT8351 dual mono to stereo coiled cable (dual...
Availability: Special Order
$5900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Sennheiser
MFR Part #: MZH600
Samy's Part #: S-035521

For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor...
Availability: In Stock
Ships next business day
$6995
QTY
K-Tek
MFR Part #: KMTS
Samy's Part #: S-047516

The K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version) offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek's famous KSUS suspenders. This KMTS is the short version designed...
Availability: In Stock
Ships next business day
$7980
QTY
K-Tek
MFR Part #: KE110CCR
Samy's Part #: KTEKKE110CCR

This K-Tek Avalon Series Aluminum Boompole with Internal XLR Cable (9 ft.) has a collapsed length of 2.7 feet (79cm) and an extended length of 9.2 feet (279cm) with only weight of 1.813 lbs (822g). This 5-section Aluminum Boompole features an Internal Coiled Cable. The top attachment is a 3/8″...
Availability: In Stock
Ships next business day
$26600
QTY
Saramonic
MFR Part #: SRSMC1
Samy's Part #: S-061275

The Saramonic SR-SMC1 Shotgun Microphone Mounting Bracket Clip with Cold Shoe can accommodate shotgun and other cylindrical microphones measuring 0.74 - 0.86" (19mm-25mm) in diameter. It is also a replacement mount for the Saramonic SR-TM1 and SR-TM7 shotgun microphones.
Its versatile mounting...
Availability: More In Transit
$2900
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]