MFR Part #: CP-BK-3
Samy's Part #: S-055060
The Peak Design Capture Camera Clip v3 (Black) is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly...
Availability: In Stock
MFR Part #: BEDHB52BK2
Samy's Part #: S-065232
The Peak Design Everyday Hip Belt v2 (Black) was born from thousands of pieces of customer feedback gathered from the v1 Everyday Backpack. This drove Peak Design to create a hip belt without compromises...one that provides tons of support and comfort, yet stowes discreetly when not in use.
FEATURES:
...
Availability: In Stock
$2495
MFR Part #: 361004
Samy's Part #: S-047793
This BlackRapid Double Slim Breathe Camera Harness is designed to carry two cameras by hanging from the right and left shoulders. The harness is comfortable to wear due to its resilient and breathable mesh pads even connected to two large cameras with their attached lenses. The mesh pads design op...
Availability: In Stock
MFR Part #: 881
Samy's Part #: S-008216
The Think Tank Digital Holster 50 V2.0 is designed for pro size DSLRs such as the Nikon D3 series or the Canon 1D and 1Ds series. This is a top loading bag for a pro size DSLR that can carry a 70-200 f2.8 with the lens hood either reversed or in position, ready to shoot.
FEATURES:
- "Pop Down"
Availability: In Stock
MFR Part #: 871
Samy's Part #: S-008214
The Think Tank Digital Holster 30 V2.0 is designed for regular size DSLRs such as the Canon 5D Mark II, 7D, and 50D or Nikon D700, D300s, and D90. The Holster can carry a 70-200 f2.8 with the lens hood either reversed or in position, ready to shoot.
FEATURES:
Availability: In Stock
MFR Part #: SW05521
Samy's Part #: SETWSW05521
The 2" Nylon Belt. Simple, durable and ready to go, this belt's a must in everyone's arsenal of tools. Clip on to it, hand tools from it, add pouches to it; whatever your choice, this belt is a great start to build your custom set-up.
Availability: In Stock
$995
MFR Part #: SB3-03-11
Samy's Part #: S-024677
Made of high quality, weather-resistant stainless steel, this ultra-handy accessory with its dual spring gates will hold, secure, and connect everything from house keys and cell phones to technical camping gear. Attach valuables to the center bar for ultimate security, link gate ends to a second...
Availability: Special Order
MFR Part #: KSWB1
Samy's Part #: S-047519
The K-Tek KSWB1 Stingray Waistbelt for Small Audio Mixer/Recorder Bags is the perfect companion for the Stingray Junior or the Stingray Small Audio Bags. The waist belt has an inner belt which keeps the belt secure with or without the mixer bag. This is facilitated via one quick buckle on each...
Availability: In Stock
MFR Part #: CCS3
Samy's Part #: S-055063
The Peak Design Clip for Capture v3 (Silver) is finally here, thanks to feedback and suggestions from our customers. It’s exactly what it sounds like—a Capture clip without a camera plate—for those only in need of an additional clip. Perhaps you have multiple backpacks or bags that you’re looking to...
Availability: Special Order
MFR Part #: 361003
Samy's Part #: S-047792
The BlackRapid Double Breathe Camera Harness is designed to carry two cameras by hanging from the right and left shoulders. The harness is comfortable to wear due to its resilient and breathable mesh pads even connected to two large cameras with their attached lenses. The mesh pads design optimizes...
Availability: In Stock
MFR Part #: 147GREY
Samy's Part #: S-053162
This Cotton Carrier CCS G3 Harness-2 (Gray) for two cameras is designed for the active photographer. The harness and side holster supports and secures 2 cameras and lenses. Work for longer periods of time without needing to go back to a camera bag for more gear. The ergonomic design of this two...
Availability: Special Order
MFR Part #: CC-BK-3
Samy's Part #: S-055062
The Peak Design Clip for Capture v3 (Black) is finally here, thanks to feedback and suggestions from our customers. It’s exactly what it sounds like—a Capture clip without a camera plate—for those only in need of an additional clip. Perhaps you have multiple backpacks or bags that you’re looking to...
Availability: In Stock
MFR Part #: SW05515
Samy's Part #: SETWSW05515
Setwear's Jumbo AC Pouch was designed, created and tested by people who work in the industry. This tough versatile pouch carries everything you need. It holds sharpies, pens and pencils of all types and sizes. It has a special compartment for your Mini-Mag Light with hook and loop flap over design....
Availability: In Stock
$2495
MFR Part #: SW05514
Samy's Part #: SETWSW05514
Setwear's Combo Tool Pouch was designed, created and tested by people who work in the industry. This great combo tool pouch holds a variety of tools for all sorts of needs. It can carry up to a 33' tape measure, gloves, with a convenient glove clip on the side, and almost anything that will fit...
Availability: In Stock
$2695
MFR Part #: 501
Samy's Part #: S-058458
Engineered to prevent de-threading, once you’ve got this Pin securely attached, it will stay attached until you’re ready to remove it.
COMPATIBLE WITH:
SpiderPro Clamp
SpiderPro v2 Plate
Lens Collar Plate
SpiderLight Plate
Availability: In Stock
$799
MFR Part #: 160
Samy's Part #: S-051374
The Spider Camera Holster SpiderLight Single Camera System is specially designed for the seasoned Mirrorless photographer. The SpiderLight Single Camera System includes a belt, holster, camera plate, pin, and a 1/8" hex wrench. Our durable SpiderLight Holster attaches to our slim and ergonomic...
Availability: Special Order
MFR Part #: 301
Samy's Part #: S-058457
Grab an extra Pro₂ Plate for your second camera and you’ll have it ready to pop in your Holster anytime. Updated features include the new Spider Pin, improved ergonomics and rubber grips.
FEATURES:
Spider Pin – designed for optimum security and made out of stainless steel for corrosion resistance
...Availability: In Stock
$3500
MFR Part #: 200
Samy's Part #: S-058453
Designed by photographers, the newly-redesigned Spider Camera Holster SpiderPro Single Camera System v2 is the perfect tool for the professional sport, wedding or event photographer looking for a strap-free carrying solution. Take the weight of your camera off your neck and shoot longer without...
Availability: In Stock
MFR Part #: BEDHB52AS2
Samy's Part #: S-065233
The Peak Design Everyday Hip Belt v2 (Ash) was born from thousands of pieces of customer feedback gathered from the v1 Everyday Backpack. This drove Peak Design to create a hip belt without compromises...one that provides tons of support and comfort, yet stowes discreetly when not in use.
FEATURES:
...
Availability: In Stock
$2495
MFR Part #: 008
Samy's Part #: S-056666
The Think Tank Photo Pro Speed Belt V3.0 (32-42 in. Waist, Black) is a fully padded waistbelt for the Modular Component System.
FEATURES:
Ability to Rotate or Lock components on the belt
Compatible with Keep It Up strap and Pixel Racing Harness V3.0
Integrates with most Think Tank backpacks
Allows...
Availability: In Stock
$4175
MFR Part #: 686GREY
Samy's Part #: S-053161
The Cotton Carrier CCS G3 Harness-1 (Gray) is designed for the active photographer. The harness supports and secures one camera with a long lens, keeping it always at the ready. The ergonomic design of this camera vest carrier distributes the weight of the camera helping to lessen the fatigue...
Availability: Special Order
MFR Part #: 886
Samy's Part #: S-044042
The new and improved Think Tank Photo Digital Holster Harness V2.0 (Black) highlights the innovative designs Think Tank Photo has become known for. Some chest mounted bags tend to sag or shift weight on very active photographers. The Digital Holster Harness V2.0 has six attachment points to each
Availability: Special Order
MFR Part #: 170
Samy's Part #: S-051375
The Spider Camera Holster SpiderLight Dual Camera System builds off of our Single Camera System, to provide pro photographers with the ability to holster two mirrorless or lightweight DSLR cameras. The hip-mounted holster is used to wear camera on waist like a cowboy instead of having two cameras...
Availability: Special Order
MFR Part #: CPS3
Samy's Part #: S-055061
The Peak Design Capture Camera Clip v3 (Silver) is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly...
Availability: Special Order
MFR Part #: SW05513
Samy's Part #: SETWSW05513
Setwear's Tool Pouch was designed, created and tested by people who work in the industry. This pouch is great for holding small tools that can fit inside a 7.5" x 6.5" area. Its a great low key design so it will stay out of your way and give you room to work without obstruction. Easy front pocket...
Availability: In Stock
$2395
MFR Part #: 150
Samy's Part #: S-051373
The Spider Camera Holster SpiderLight Holster and Plate Box Set is the best holster on the planet for mirrorless and lightweight cameras. Slip it right on your belt, attach our Spider plate to your camera, and shoot like a pro. This camera holster is lightweight, durable and extremely versatile. The SpiderLight...
Availability: Special Order
MFR Part #: 011
Samy's Part #: S-056667
The Think Tank Photo Pro Speed Belt V3.0 (38-48 in. Waist, Black) is a fully padded waistbelt for the Modular Component System.
FEATURES:
Ability to Rotate or Lock components on the belt
Compatible with Keep It Up strap and Pixel Racing Harness V3.0
Integrates with most Think Tank backpacks
Allows...
Availability: Special Order
MFR Part #: KRG0311
Samy's Part #: S-010572
The Nite Ize S-Biner Key Ring (Stainless Steel) features six different-colored, lightweight plastic S-Biners that attach quickly and securely to a sturdy, solid, stainless steel ring. It's easy to hang on hooks or loop through cord. Use one of the plastic S-Biners to attach the whole unit to...
Availability: In Stock
$399
MFR Part #: SW05532
Samy's Part #: SETWSW05532
This clip fits belts up to 3" wide and secure in place with a snap of a button.
Availability: In Stock
$795
MFR Part #: NPXL0301
Samy's Part #: S-010560
Made of durable, weather-resistant materials and backed with a strong, secure clip, the Clip Pock-Its XL Utility Holster is the perfect choice for people who want to keep their most-used tools and personal essentials all in one convenient place. Designed with multiple interior pockets that hold...
Availability: In Stock
$1695
MFR Part #: BEDHB52MN2
Samy's Part #: S-065234
The Peak Design Everyday Hip Belt v2 (Midnight) was born from thousands of pieces of customer feedback gathered from the v1 Everyday Backpack. This drove Peak Design to create a hip belt without compromises...one that provides tons of support and comfort, yet stowes discreetly when not in use....
Availability: In Stock
$2495
MFR Part #: SW05528
Samy's Part #: SETWSW05528
Setwear's Mini Tool Pouch is designed, created and tested by people who work in the industry. The Mini Tool Pouch carries small tools such as knives, multi-tools, flashlights, and other small tools that can fit in its 8" x 4" space.
Availability: Special Order
MFR Part #: SW05529
Samy's Part #: SETWSW05529
Setwear's Radio Pouch is designed, created and tested by people who work in the industry. These top quality pouches hold many different size radios, so no matter what size you have it'll always fit securely so you won't have to worry about loosing it.
Availability: Special Order
MFR Part #: LHS03
Samy's Part #: S-010559
With its sturdy construction, molded foam insulation, and high-quality elastic side panels, the Lite Holster Stretch keeps flashlights of nearly every size safe at your side. In its relaxed state, a mini AAA flashlight is snug and secure, and the panels expand to provide a close fit for larger...
Availability: In Stock
$899
MFR Part #: KRB0301
Samy's Part #: S-010570
Made of high quality stainless steel, the S-Biner Key Rack + Bottle Opener (Black) has a secure gate closure on one end, allowing you to clip your keys to an existing key ring, belt loop, purse strap, zipper pull-anything with a loop or D-ring. Its interior is designed to serve as a handy bottle...
Availability: In Stock
$549
MFR Part #: KRB0311
Samy's Part #: S-010571
Made of high quality stainless steel, the Nite Ize S-Biner Key Rack + Bottle Opener (Stainless Steel) has a secure gate closure on one end, allowing you to clip your keys to an existing key ring, belt loop, purse strap, zipper pull-anything with a loop or D-ring. Its interior is designed to serve...
Availability: In Stock
$549
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE