CONTACT US AT 800-321-4726
HDSLR Camera Support Accessories
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: CAEXHDL
Samy's Part #: S-015849

The Extended Handles are designed to be used on any shoulder rig that uses 15mm Rod system. The Extended Handles are more ergonomically placed, since they are lower on the rig allowing the user to carry more weight for longer periods of time without much fatigue. Unlike standard handles, the...
Availability: In Stock
$4900
QTY
MFR Part #: VATJT1SET
Samy's Part #: S-031403

Unlike many portable jibs, the new Varavon TILT JIB T1 3.3 ft. MiniJIB can actually tilt the camera when performing vertical movements to keep your subject in frame. This all accounts to a slightly heavier setup than the other Carbon Fiber Mini Cranes, but the Varavon Tilt Jib is strong enough...
Availability: In Stock
$26775
QTY
MFR Part #: 30660001
Samy's Part #: S-014062

The microFollowFocus with a 0.8 film pitch drive gear allows you to pull focus of still and cinema lenses. The follow focus includes a backlash dial that enhances the precision of focusing. The integrated hard stops with easy begin/end setups enable fast repeatable racking between 2 focus points,...
MFR Part #: GMBC13
Samy's Part #: S-058312

Whether you're a solo operator with your Crane 2 gimbal atop a monopod or boom, or a camera assistant tasked with directing the camera, the
Zhiyun-Tech Remote Control for Crane 2 can help you control your camera while the stabilizer itself is out of reach. Connect the remote control itself to...
Availability: In Stock
$14900
QTY
MFR Part #: Z-RMM
Samy's Part #: S-043054

The Rosette Minimount slides onto a set of 15mm lightweight spaced rods to give you an Arri M6 rosette on either side of the rods. You can use these rosettes to mount a number of accessories.

Features:
  • Mount the Rosette Minimount to 15mm VCT rods and tighten the ratcheting lever when in desired
...
MFR Part #: SUVTJ18
Samy's Part #: S-041579

The SIRUI VTJ-1.8 Travel Jib provides creative height changes and following/panning capabilities not possible when your camera is at a fixed position. The VTJ-1.8's portability, flexibility and economy make it ideal for any shooting situation! The precision machining and high performance bearings...
Availability: In Stock
$59999
QTY
MFR Part #: 7-BP970G-CM
Samy's Part #: S-028398

The Marshall Electronics Canon BP-970G Battery Assembly for M-LCD/M-CT7 is a spare BP-970G battery assembly for Marshall's M-LCD or M-CT7 monitors. The battery plate mounts onto the back side of the monitor and is easily replaceable.

Compatibility: M-LCD7-B-C511, M-LCD7-B-CE6, M-LCD7-B-NEL3, M-...
Availability: On Backorder
$4395
QTY
MFR Part #: YSRP01B
Samy's Part #: S-034629

The Phototools Gear Ring for Follow Focus is a rubber gear with a standard pitch of 0.8 and a maximum diameter of 4.1".

This gear ring ensures that the follow focus gear has a slip-free grip on the focus ring of your camera lens.
Availability: In Stock
$999
QTY
MFR Part #: 0030-0001
Samy's Part #: S-051138

The Syrp Genie Motion Control Time Lapse Device is a simple, portable solution for motion control Time-lapse + Real-time video. Designed to be part of your regular camera kit, with no external wires, batteries or controllers there’s no need to ever go without the option of motion control again....
Availability: In Stock
$64900
QTY
MFR Part #: CONVMSDIMUX4K
Samy's Part #: S-052296

Blackmagic Mini Converters are designed to be used anywhere! You can put them in equipment racks in the studio, on news trucks, or use them outside for live sports and other events. Mini Converters have a straightforward, compact design that makes them easy to use and super reliable for 24/7 o...
$49900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: DMWSFU1VLOG
Samy's Part #: S-041094

In response to the demand from the film production market, log video recording (V-Log L) is now available for the LUMIX GH4, and offers exceptional flexibility as well as wider dynamic range for color grading in post-production process. V-Log / V-Log L were developed to feature similar charact...
Availability: In Stock
$9999
QTY
MFR Part #: TB-MC-005
Samy's Part #: S-026698

The TetherBlock MC is designed to help protect your cameras data connection port whether shooting on a tripod or hand held. Camera data ports are fragile. One pull from a data cable connected to a camera can cause expensive camera repair and a camera out of service on an important shoot!

TetherBlock...
Availability: In Stock
$8995
QTY
MFR Part #: PIPE6
Samy's Part #: S-028775

The Modern Studio Equipment Track For Dana Dolly (6 Pipes) now has a portable track system for those who would like to travel with their track. Made of two custom aluminum extrusions, the design offers a seamless ride that can be configured in 3, 6, or 9' sections.
Availability: On Backorder
$3999
QTY
MFR Part #: DMW-XLR1
Samy's Part #: S-050018

Record audio professionally with the Panasonic XLR Professional Microphone Adaptor Dual Terminal that is compatible with Panasonic LUMIX GH5.  It provides two analog XLR jack terminals and can support output of: Digital, I2S format, Fs = 48 k or 96 kHz, Bit depth of 16 or 24 bit.  An integrated...
Availability: In Stock
$39799
QTY
MFR Part #: RMH1
Samy's Part #: S-028333

The RigWheels RMH1 RigMount with Ball Head is a magnetic mount that uses rare earth magnets to achieve its surprisingly high holding power. (up to 35lbs in a vertical pull) This version has its mounting bolt on top sized specifically for use with cameras and small ball heads. it has a a specially...
Availability: On Backorder
$4999
QTY
MFR Part #: 427006
Samy's Part #: MATT427006

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
$16400
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: RONINPART2
Samy's Part #: S-034788

The DJI Innovations Dual 15mm Rod Support for Ronin Gimbal is a mount for holding 15mm rods. The mount adheres to LWS standards, allowing you to add a variety of lens-related accessories like matte boxes and focus control systems. This part can be used with the rods included with the Ronin.
$10000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: ATOMACCKT1P
Samy's Part #: S-057835
Availability: In Stock
$29500
QTY
MFR Part #: Z-MO-2
Samy's Part #: S-023485

The Zacuto Z-Mount II connects two 15mm rods set at a right angle. Each rod port is controlled separately by a Zacuto Z-release ratcheting lever. The Z-Mount II can also accept a Zacuto Zamerican Arm end. This piece is perfect for attaching an articulating arm to your baseplate, handles or anywhere...
Availability: In Stock
$9500
QTY
MFR Part #: HTPHV2
Samy's Part #: S-021210

The JAG35 Top Handle V2 is a simple solution for adding a handle anywhere on your rig.  The Top Handle is compatible with any rods and rigs that use the industry standard 15mm rod system, making it easy to get those low shots or to get a better grip on your camera rig. Many changes have come to...
Availability: In Stock
$4900
QTY
MFR Part #: CIADAS000K19
Samy's Part #: S-010903

The Cinevate Follow Focus Gear Ring Kit consists of 3 adjustable follow focus rings that facilitate the use of Cinevate DURUS follow focus unit with lenses having circumference up to 10" (25.4cm). Included in the kit are 5 sets of spokes; each set containing 6 different spokes (3/8", 1/2", 5/8",...
$10995
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 2-112-0001
Samy's Part #: S-046856

The Redrock Micro Cold Shoe Mounting Spud is a machined accessory that enables you to attach a cold shoe-mounted accessory to rigs or camera setups. The Cold Shoe Spud is typically used in conjunction with a microMount? or a grip rod to attach a Cold Shoe Accessory to any industry-standard 15mm...
Availability: In Stock
$3200
QTY
MFR Part #: DDMOUNT-AC-QKRLS
Samy's Part #: S-013462


The Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Accessory features a quick release base plate that fastens to your DSLR camera. Then, the base plate slides into the adapter plate, which features a push button key to lock the camera into place. This simple push and release function

...
Availability: In Stock
$2879
QTY
MFR Part #: 9CPA1
Samy's Part #: S-049509

The 9.Solutions C-Pan Arm Camera Guide is a very unique camera guide contraption that mechanically can move a camera in a variety of different paths; straight pan, outward curve, inward curve, horizontally, vertically or at a sloped angle or even forward or backward moves.

The camera is always...
MFR Part #: DDMNT-BOOM
Samy's Part #: S-031411

Mount your action camera, mirrorless camera, or point-and-shoot to the Delkin Devices Fat Gecko Kaboom Boom Arm to capture images & video from perspectives never before possible. Shoot over crowds at a concert, take footage of yourself inside of a barreling wave, follow your friend as he clears...
MFR Part #: 00380003
Samy's Part #: S-056747

A new era of motion control. The Syrp Genie II Linear is stronger, faster and quieter than its predecessor with the same attention to simplicity and portability. Sure, you can still fit it in your backpack, but this time you’ll also be getting keyframes, full camera control, Live View, high speed
...
Availability: In Stock
$89900
QTY
MFR Part #: CP33
Samy's Part #: S-057174

The Shape CP33 Multi-Purpose Mounting Cheese Plate
 will let you add various accessories and devices to your camera rig. Just attach it to any two 15mm rods on your rig, and you'll have a total of thirty-three 1/4-"20, 3/8"-16, and 10/32" threaded holes to work with.

FEATURES:

This precision-machined, one-piece...
Availability: In Stock
$8712
QTY
MFR Part #: 951416
Samy's Part #: S-048683

The Cool-Lux LuxGear Follow Focus Gear Ring (72 to 73.9mm) is seamless, cinema pitched lens gears for use with a follow focus. Each gear is precision molded in high-durometer silicone to create a fully functional compression fit on a lens' focus barrel without the need for cumbersome buckle m...
Availability: In Stock
$2875
QTY
MFR Part #: 951410
Samy's Part #: S-048676

The Cool-Lux LuxGear Follow Focus Gear Ring (60 to 61.9mm) is seamless, cinema pitched lens gears for use with a follow focus. Each gear is precision molded in high-durometer silicone to create a fully functional compression fit on a lens' focus barrel without the need for cumbersome buckle m...
Availability: In Stock
$2875
QTY
MFR Part #: Z-HC
Samy's Part #: S-030346

The Zacuto Half Cage creates a solid, adjustable, universal cage structure around the side and top of your camera rig. This will be the last cage you need to buy! It is adjustable to work with all cameras, sizes and shapes. It creates great stability, especially when shooting with DSLR's, giving...
Availability: In Stock
$37050
QTY
Notice: This item is non-returnable
MFR Part #: 3-118-0002
Samy's Part #: S-022213

The Redrock Micro RigLight is the perfect lighting solution for your camera to see what you are doing in dim light. The rigLight can be conveniently mounting using the supplied mounting bracket, and the flexible gooseneck means you can direct the light wherever you want it. Use your D-Tap to power...
$4950
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: 703
Samy's Part #: S-044508

The D Focus Systems Canon C Series Baseplate (Black) is a lightweight, CNC machined aluminum baseplate specifically designed for the Canon C series of video cameras. The baseplate uses 15mm support rods spaced 60mm apart. It is used to securely mount accessories such as a follow focus, matte box,...
Availability: In Stock
$9995
QTY
MFR Part #: 951423
Samy's Part #: S-048690

The Cool-Lux LuxGear Follow Focus Gear Ring (86 to 87.9mm) is seamless, cinema pitched lens gears for use with a follow focus. Each gear is precision molded in high-durometer silicone to create a fully functional compression fit on a lens' focus barrel without the need for cumbersome buckle me...
Availability: In Stock
$2875
QTY
MFR Part #: 3075
Samy's Part #: S-021106

Already own one of the Dinkum Systems ActionPod mounts or any other device with a 1/4-20" thread? Make your gear do double duty with the 1/4-20 to 3/8-16 in. Adapter Screw. Allows fast and simple conversion from a camera mounting device to a microphone shock mount.  Standard 1/4-20" thread converts...
Availability: In Stock
$535
QTY
MFR Part #: 701
Samy's Part #: S-026906

The D|Rails: DSLR Baseplate is a lightweight, sturdy, CNC machined aluminum baseplate for your DSLR camera. Adhering to the Arri Lightweight standard, the D|Rails baseplate uses 15mm support rods spaced 60mm apart. The D|Rails: DSLR Baseplate is the ideal "first step" in building up your DSLR...
Availability: In Stock
$9900
QTY
MFR Part #: HD450
Samy's Part #: S-027646

The Hoodman HD450 Camcorder Hood is made to fit 4.0 inches wide LCD display of HD450FX camcorder series. It is used to provide best viewing experience by blocking out glare and keeping away the unwanted light. You can easily view the images and replay the recorded video.
Availability: In Stock
$2499
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]