MFR Part #: STRA7III
Samy's Part #: S-059435
The ikan STRATUS Complete Cage for Sony a7/a7R III Series Cameras is a new form-fitting camera cage direct from Ikan. The frame is shaped to accommodate the Sony a7 III and a7R III camera bodies. The cage comes in three main parts: the top handle, the base, and the camera frame.
The top handle
...Availability: In Stock
MFR Part #: RS3124
Samy's Part #: S-016104
The RPS Studio FloPod Video Stabilizer is an innovative stabilizing support for video DSLR cameras. Conceptually the FloPod borrows from stabilizers with 3-axis gimbals, but the form factor is all its own, and optimized for hybrid DSLR cameras that do both stills and HD video. Mounted to a C-bracket, the
...Availability: Special Order
MFR Part #: CRANE2
Samy's Part #: S-054555
Includes FREE Zhiyun-Tech Focus Motor!
Availability: In Stock
MFR Part #: YSCC80
Samy's Part #: S-034630
The Phototools 32" Camera Slider is approximately two and a half feet long and features three steel bearing rollers. The slider track incorporates three sets of 1/4"-20 and 3/8"-16 mounting holes, allowing you to support it in the center or at both ends. Two removable height adjustable legs...
Availability: In Stock
MFR Part #: 100159
Samy's Part #: S-012270
Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track? The Pocket Dolly? is the solution for those shots! At just 38.5 in length and 7.5 pounds, the Pocket Dolly? is very portable, so you can always get the shot you need, where ever you...
Availability: In Stock
MFR Part #: YOD02
Samy's Part #: S-034632
Expand your photographic boundaries with the Phototools Rolling Mini Dolly Stabilization System and shoot like a pro. You're going to find new vantage points from which to shoot your subjects and have fun doing it! Follow the movement of your subject at ground level or across a tabletop or counter....
Availability: In Stock
$2900
MFR Part #: YOD03
Samy's Part #: S-034633
The Phototools Tri Skate Mini Dolly with Scale Marks is a 3-wheel mini dolly that you can use to achieve fluid motion shots in straight lines, curves, wide circles and tight 360° spins.
Stainless steel ball bearings inside the wheels enable smooth motion. The wheels tighten, loosen and can be...
Availability: In Stock
MFR Part #: PCPDKIT
Samy's Part #: S-017439
The very affordable Pico Dolly gives a stable platform for smaller video productions. Made of aluminum and roller blade type wheels with high quality ball bearings, the 3-1/2 inch wide dolly features three 1/4-20 female thread positions for mounting optional ball heads or articulating arms. This...
Availability: In Stock
MFR Part #: 2203
Samy's Part #: S-063805
The SmallRig Full Cage for Blackmagic Pocket Cinema Camera is a form-fitting cage. It is securely locked to the camera by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles and scratches. On the top and left side of the cage are built-in NATO rails, where...
Availability: In Stock
MFR Part #: 2243
Samy's Part #: S-063802
The SmallRig Cage for Nikon Z6/Z7 Cameras is a form-fitted cage which is designed to provide all-around protection and mounting options for Nikon Z6 and Z7. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and features a m2.5 threaded hole on the left side as a second lock point to prevent the camera form...
Availability: More In Transit
MFR Part #: C12D6
Samy's Part #: S-039198
The Benro MoveOver12 23.6" Dual Carbon Rail Slider with Flywheel is ideal for strength and lightweight support, the MoveOver12 includes two 100% 22mm carbon fiber rails. Flywheel with belt drive gives precise control with rubber track belt drive. The carriage operates using 4 quiet operation b...
Availability: Special Order
MFR Part #: CCC2271
Samy's Part #: S-063804
The SmallRig Cage for Canon 5D Mark III or 5D Mark IV is a custom and form-fitted cage designed to provide an all-around protection and mounting options for Canon 5D Mark III IV. It locks camera firmly via 1/4’’ screws at the bottom. And it protects camera from twisting and scratching. Attached Slotted screwdriver on...
Availability: More In Transit
MFR Part #: CBM4K
Samy's Part #: S-059684
Made of CNC Machined Aluminum Top and bottom of the cage are designed with 1/4-20 threaded holes with anti rotating pins to strongly secure the camera position 1/4-20 threaded holes for easy tripod plate attachment Easy access to the memory card, the battery door, the lens release button and all...
Availability: In Stock
MFR Part #: DLV11
Samy's Part #: S-026693
The new Dot Line Corp. V-11 HDSLR Rig with Follow Focus & Matte Box has Rig, Follow Focus unit and Matte Box all in an attractive, full color box. The Rig features industry standard 15mm rods that are black anodized. The use of 15mm rods and connectors allows for easy adjustments of the rig giving flexibility...
Availability: In Stock
MFR Part #: A73CAGE
Samy's Part #: S-057902
The Shape Ergonomic Cage for Sony a7R III/a7 III Camera is targeted at filmmakers, videographers and photographers who want a simple, hassle-free and ergonomic cage design that really works.
Specifically designed for the Sony A7R III camera, the form-fitting cage offers additional protection and...
Availability: More In Transit
MFR Part #: M9LC34
Samy's Part #: S-042480
The Motionnine Linecam 34 Slider (13 In.) is very compact and solid slider. It's small but gives a long enough and beautiful performance. Linecam consists of two rail shafts and two moving blocks. And it travels about twice the distance of its original length on the tripod. So it allows you a...
Availability: In Stock
MFR Part #: 21-066-0002
Samy's Part #: S-016588
The Redrock Micro's Studio Bundle for the Sony F3 series cameras is the perfect set of cinema accessories for studio and tripod work using this fantastic new camera from Sony. The Studio Bundle includes some of Redrock's most popular products. The microMatteBox Deluxe Bundle delivers light and...
Availability: Special Order
MFR Part #: OGKIT150
Samy's Part #: S-030341
The Dana Dolly Original Kit is best camera mounting system that is universally useable. The Dana Dolly is designed to provide free movement with smooth operational experience to the professional photographers for best production results. The Dana Dolly is easy to set up, it can be used with a...
Availability: Special Order
MFR Part #: DDORK1
Samy's Part #: S-030344
The Dana Dolly Portable Dolly System Rental Kit with Original Track Ends is called a "Rental" kit because of the popularity with Rental Houses, this is the "Original" Rental Kit, in a custom wheeled SKB Case with folding handle. Includes: Dolly, 2-"Original"-style Track Ends, 75mm, 100mm, 150mm...
Availability: Special Order
MFR Part #: UNIRENTAL
Samy's Part #: S-028721
This is the Dana Dolly Portable Dolly System Rental Kit with Universal Track Ends, in a custom Wheeled SKB Case with folding handle.
The kit includes:
- Dolly
- 2-"Universal"-style Track Ends
- 75mm, 100mm, 150mm Bowl Adapters
- Center Support
- Monitor Mount
- Custom SKB Case
Features:
- 16 Custom
Availability: Special Order
MFR Part #: DLSLD47
Samy's Part #: S-018106
The Dot Line DLC 47" Camera Slider is a heavy-duty slider that can be attached onto a tripod or used standalone on its included feet. It is 47 inches long, and its feet raise its height approximately 2 inches. It can take on up to ten pounds.
It is equipped with a spirit level that indicates
Availability: In Stock
$19995
MFR Part #: 2251
Samy's Part #: S-063808
The SmallRig Cage for Canon EOS R is custom designed and form-fitting. It mounts to the camera's tripod socket with a 1/4’’-20 screw, with anti-twist design and rubber cushion on the base plate to prevent twisting. It comes with multiple 1/4’’-20 and 3/8’’-16 threaded holes allowing mount of a...
Availability: More In Transit
MFR Part #: CCP2488
Samy's Part #: S-064845
The SmallRig Cage for Panasonic S1H is designed to provide protection and accessory mounts for S1H. The cage secures to the bottom of camera via 1/4”-20 and m2.5 screws to prevent twisting. Multiple 1/4"-20 and ARRI 3/8”-16 accessory threads around the cage allows to mount Monitor Mount 2294,...
Availability: More In Transit
MFR Part #: 415168
Samy's Part #: S-007229
Matthews Car Mount Systems integrate the MICROgrip technology along with the recently introduced Matthews family of ball heads to provide the professional camera person a very strong, versatile and reliable system for mounting cameras to automobiles, trucks, boats, trains, and even low flying...
Availability: In Stock
MFR Part #: SYKIT0020H
Samy's Part #: S-065546
The Syrp 36 in. Magic Carpet PRO Medium Slider Kit builds on their original Magic Carpet design, incorporating strong alloy materials and quick release components to give filmmakers a practical and easily assembled solution for cinema cameras. This kit includes a 3' track section. Additional track
Availability: In Stock
MFR Part #: ES-T27-A
Samy's Part #: S-050986
The Lightweight Rig Cage With Wooden Handle For Sony Alpha a6300 a6500 is specifically designed for SONY α6300 and α 6500 series full frame mirrorless digital cameras. The cage is CNC-milled from high quality aluminum, which significantly protects the camera from being damaged. The rig is suitable...
Availability: In Stock
MFR Part #: 2228
Samy's Part #: S-063803
The SmallRig Cage for Fujifilm X-T2 and X-T3 Cameras is a form-fitted cage which is designed to provide all-around protection and mounting options for camera. The cage features an integrate side handle to provide comfortable handheld shooting. It is fixed on the camera via the bottom 1/4"-20 threaded hole and with anti-twist design. The one piece aluminum...
Availability: In Stock
MFR Part #: 2014C
Samy's Part #: S-064843
The SmallRig Accessory Kit for Sony a7 II, a7R II, and a7S II Cameras is made up of the cage, HDMI cable clamp and top handle, and it totally meets the demands of the clients while shooting in handheld motion. The 1/4 threaded holes in the top handle could be attached with EVF support 1903 so...
Availability: More In Transit
MFR Part #: 1889B
Samy's Part #: S-063809
The SmallRig Cage for Sony a6500/a6300 Cameras is a form-fitted cage designed to provide all-around protection and mounting options for Sony A6300 and A6500. The cage is fixed on the camera via the 1/4"-20 threaded hole on the bottom and a m2.5 threaded hole on the right side as a second lock point to prevent the camera from...
Availability: In Stock
$2990
MFR Part #: FS72BT
Samy's Part #: S-056613
The SONY FS7M2‘s handle features a different and more efficient design. In reaction to this change, we've designed the SHAPE FS7M2 SERIES to optimize the manipulation of this camera.
SHAPE crafted the SONY FS7M2 Rig Baseplate And Top Plate as a starter rig for the Sony FS7M2. It directly supports the...
Availability: More In Transit
MFR Part #: C300SM
Samy's Part #: S-057173
The Shape Canon C100 C300 C500 Shoulder Mount is a shoulder rig with light weight support (LWS) for the Canon Cinema EOS line of movie cameras. As the three have a similar profile, this rig is compatible with the C100, C300and C500 models. The base plate features specially recessed rods to acc...
Availability: In Stock
MFR Part #: 2049
Samy's Part #: S-063806
The SmallRig Cage for Panasonic GH5/GH5S benefits your Panasonic GH5 camera in video production by strengthening protection and stability and providing more mounting options. The cage fits the camera perfectly, and it does not block any access to the SD card slot, battery compartment, and all camera controls....
Availability: In Stock
MFR Part #: KCPJTRAVEL
Samy's Part #: S-029511
The Kessler Crane Pocket Jib Traveler is designed for shooters that require an ultra-portable jib solution. It features a reach of 72" from the fulcrum when fully extended. The Pocket Jib Traveler is completely self-contained, and it collapses to 27" in length for transport and storage without...
Availability: In Stock
MFR Part #: STRGH5
Samy's Part #: S-059439
The ikan STRATUS Complete Cage for Panasonic GH4/GH5 Cameras is a new form-fitting camera cage direct from Ikan. The frame is shaped to accommodate the Panasonic GH4 and GH5, with a mount on the bottom side of the cage frame that can be repositioned to accommodate the slightly different mounting
Availability: More In Transit
MFR Part #: CCS2416
Samy's Part #: S-065494
The SmallRig Cage for Sony a7R IV is a form-fitting full cage. The camera is fixed by a 1/4 screw on the bottom and a M2.5 screw on the side. It comes with multiple 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes, a built-in NATO rail and a cold shoe, allowing mount of different accessories....
Availability: More In Transit
MFR Part #: 2096B
Samy's Part #: S-063820
The SmallRig Cage Kit for Sony a7 III and a7R III is designed for Sony A7RIII/A7III. It offers great protection and lots of additional attachment options for the cameraman. It enables the camera to release its potential to the utmost as per the needs of cameraman during shooting. It includes A7RIII...
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE