MFR Part #: 700.0023
Samy's Part #: S-040136
The Cineo Lighting Matchstix D-Tap Male to DC Barrel Female Power Cable (36 In.) is used to power on the LED light. The cable is 36 inches long for distance operation and is made of high quality material for long life.
Availability: More In Transit
$2799
MFR Part #: FLXA011
Samy's Part #: S-026473
The Fiilex D-Tap Cable - Type A1 (also known as P-Tap) is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are commonly found on DC Broadcast Batteries. This is a coiled cable that is slightly under 2 ft long when extended and allows...
Availability: More In Transit
$2900
MFR Part #: DXBAT43
Samy's Part #: DEDODXBAT43
The Dedolight 4 ft. Battery Cable, XLR to 4 Pin enables operation of the DLH4 fixture from a DLBAT battery pack.
Availability: In Stock
MFR Part #: 7423
Samy's Part #: S-040674
The Westcott Flex D-Tap Cable is an essential accessory for pairing Flex 10" x 3", 10" x 10", 1' x 1', and 1' x 2' LED mats with portable power sources. This durable 40" cable features an industry-standard D-Tap end that can be used with the Flex Portable Battery or other D-Tap/P-Tap/PowerTap...
Availability: In Stock
$3990
MFR Part #: FLXA013
Samy's Part #: S-027532
The Fiilex D-TAP Type B1 Cable is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are commonly found on DC Broadcast Batteries. The cable is coiled and could extend up to 2 ft. for connecting the battery source to the light. The...
Availability: Special Order
MFR Part #: FLXA012
Samy's Part #: S-024757
The Fiilex 2.5m Curled D-TAP Cable is a coiled cable that is 2.5m long when extended and allows for connection to a DC battery without having excess slack on set. This cable is designed for an alternative way to power the P360/P200/P180. The plug fits into industry standard D-Tap ports that are...
Availability: In Stock
$3900
MFR Part #: 800-0289-A
Samy's Part #: S-052402
The Light and Motion D-Tap Cable for Stella 1000 & 2000 connects your Stella to an external battery with DTAP connection to both power and recharge the light.
Features:
- Connects your Stella to an external battery
- DTAP connection to both power and recharge the light
Availability: Special Order
MFR Part #: T180
Samy's Part #: LOWET180
Lowel 16' AC Power Cable with On/Off Switch for the Tota and Omni Lights. #18/3 switched AC
Availability: Special Order
MFR Part #: 402010
Samy's Part #: SMIT402010
This Smith-Victor DC-1 Dimmer Variable Wattage Control is a simple dimmer control for use with tungsten lights rated 600 total watts or less. It consists of a 110 Volt AC 2-prong plug, a rheostat with sliding control, and a 2-prong socket. Note: a 3-2 prong adapter such as BH# GBGA2 is required...
Availability: In Stock
$2195
MFR Part #: RS4059
Samy's Part #: S-008999
This 4 in 1 Florescent Adapter allows the use of 4 flourescent lamps in one socket. used in the folding softboxes. Depending on the lamp which is selected, the light output is equivalent to over 1000 watts of photoflood. Maximum wattage is 300 watts.
Availability: Special Order
MFR Part #: 7597
Samy's Part #: S-059224
The Westcott Flex Cine Extension Cable (16 ft.) connects any Flex Cine LED mat to a Flex Cine Dimmer allowing you to easily control your lighting in hard-to-reach positions. It's heavy-duty to withstand years of use on set and on location.
Availability: Special Order
MFR Part #: 7413
Samy's Part #: S-035315
Use the Flex LED in and around water without worry with the Flex Dimmer Extension Cable. This high-quality water-resistant cable gives photographers the ability to add 16 feet of extension between the Flex Dimmer and the Flex LED panel.
Features:
- For use with the Westcott Flex
- 16 foot extension
Availability: In Stock
$2990
MFR Part #: 7436
Samy's Part #: S-041129
The Westcott Dimmer Extension Cable for Flex LED Mats (16 ft.) gives filmmakers and photographers the ability to add a full 16 feet of rainproof extension between 1 x 3 ft. and 2 x 2 ft. Flex LED mats and dimmers. This essential Flex accessory provides added protection to Flex dimmers when shooting...
Availability: Special Order
MFR Part #: 800-0300-A
Samy's Part #: S-042165
Recharge the Stella Pro with a vehicle's 12V plug-in power receptacle with the Light & Motion Car Cable for Stella PRO. The cable is made of high quality material for long life and robust use with Stella Pro 5000 light.
Features:
- Use with Stella Pro 5000 light
- Made of high quality material
Availability: Special Order
MFR Part #: 800-0288-A
Samy's Part #: S-042164
Connect your Stella Pro to an external battery with the Light & Motion DTAP Cable for Stella PRO connection to both power and recharge the light. The cable is made of high quality material for long life and robust use with Stella Pro 5000 light.
Features:
- Use with Stella Pro 5000 light
- Made
Availability: Special Order
MFR Part #: 63700
Samy's Part #: ROSC63700
This Y-Cable is for use with the Rosco LitePad.
PLEASE NOTE: Cable photograph is for illustrative purposes only. Actual cable will differ in appearance.
Availability: Special Order
MFR Part #: P181
Samy's Part #: LOWEP181
Adapts the Pro-light for use with many 30v batteries. No wiring required.
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE