CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Matthews
MFR Part #: B756040
Samy's Part #: MATTB756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head, Arm and has a Black Finish. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. This is a black Matthews Century C Stand Grip Head Kit. It consists of a Double Riser Sliding...
Availability: In Stock
Ships next business day
$15600
QTY
Matthews
MFR Part #: 756040
Samy's Part #: MATT756040

The Hollywood 40" Double Riser C Stand with Sliding Leg includes Grip Head & Arm. Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial...
Availability: In Stock
Ships next business day
$15280
QTY
RPS Studio
MFR Part #: RS1068
Samy's Part #: S-005585

Medium weight stand for easily supports most monolites strobes and lampheads. Heavier diameter tubing for aded strength.
Availability: In Stock
Ships next business day
$2995
QTY
Godox
MFR Part #: 260T
Samy's Part #: S-053069

The Godox Air-Cushioned Light Stand (8 ft.) is an ideal light stand for outdoor or indoor photography. The stand extends up to 8 feet, sure-twist section locks of 4 sections. The air-cushioned helps to lower down slowly that ensures the safety of light mounted.

Features:
  • Extends up to 8 feet
...
Availability: In Stock
Ships next business day
$2500
QTY
RPS Studio
MFR Part #: RS1130
Samy's Part #: S-022024

The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
Ships next business day
$6995
QTY
STUFFT
MFR Part #: SAMTMBLU
Samy's Part #: S-053678

The
STUFFT Cinema Works T-Marker Shot Bag (Blue) is designed for marking actors' positions on any surface. The T Marker is made of heavy-duty nylon material and filled with shot, making it extremely durable and heavy enough to stay in place. A perfect reusable alternative for when you can't or...
Availability: In Stock
Ships next business day
$1599
QTY
Manfrotto
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
Ships next business day
$2902
QTY
Matthews
MFR Part #: 756020
Samy's Part #: MATT756020

Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
Ships next business day
$15280
QTY
Dot Line
MFR Part #: DL-3103
Samy's Part #: S-051067

The versatility of the Dot Line Corp. Super Clamp For Seamless Backgrounds is equaled only by its durability and is used to clamp the seamless background papers. An item to have on hand at all times, the Super Clamp can be clamped to anything of 1.75 inches. The Super Clamp can also accept a s...
Availability: In Stock
Ships next business day
$295
QTY
Matthews
MFR Part #: B756140
Samy's Part #: MATTB756140

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
Ships next business day
$18800
QTY
STUFFT
MFR Part #: 25LB
Samy's Part #: S-024744

The Saddle Sandbag 25 lb are available in various shapes to meet your requirements of photography equipment. These are used to strengthen the stability of stands and for balancing.

Features:

  • Outer shell is water resistant, inner shell is polypropylene.
  • Handles on both sides are heavy duty
...
Availability: In Stock
Ships next business day
$3495
QTY
Matthews
MFR Part #: B756020
Samy's Part #: MATTB756020

Features a sliding leg making it usable on uneven place flags, color gels, bounce cards, and silks in front of light sources to block, direct, or modify the light. It can also be used to mount lights or rig anything that will fit on the stand.
Availability: In Stock
Ships next business day
$15280
QTY
Avenger
MFR Part #: A2033F
Samy's Part #: S-003085

This Avenger A2033F Century C Stand is a favorite among professional photographers, film makers and videographers everywhere. It is durable, and designed to collapse flat for easy transport and storage. It rises to a maximum height of 10.75' (3.25 m). The leg design of Century Stands provides...
Availability: Special Order
$15188
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Manfrotto
MFR Part #: 1051BAC
Samy's Part #: S-003024

The 5/8" "Baby" Male Spigot Lightweight stands are another product innovation from Manfrotto Lighting Support. Their lightweight and compact-size make them a practical tool for your lighting support needs. The lightweight stand range consists of 7, 8, 9 and 12' stands which can be purchased as...
Availability: Special Order
$7988
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 756120
Samy's Part #: MATT756120
This Matthews Century Plus kit consists of a C Plus Stand with 20 inch riser and removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.

The maximum height of this stand with the arm extended is 5.25' (1.6 m). The stand itself rises to...
Availability: In Stock
Ships next business day
$18800
QTY
Phototools
MFR Part #: YFPFMP2
Samy's Part #: S-043801
Availability: In Stock
Ships next business day
$7999
QTY
Savage
MFR Part #: DS009-DB
Samy's Part #: S-055845

The Savage Drop Stand & Boom Arm features an aluminum, adjustable suspension boom arm and our 9′ Drop Stand. Providing all the benefits of a boom, minus the bulk, this duo is your solution to convenient, on-the-go photo/video gear. The boom arm collapses down to 45″, extends to 75″ and can be swapped out on the...
Availability: In Stock
Ships next business day
$12599
QTY
STUFFT
MFR Part #: SHOTBAG20
Samy's Part #: S-033998

The STUFFT 20 lb Shot Bag is encapsulated in an inner poly bag and embroidered with the word "shot" and the weight in pounds on the outside. The bag is used to stabilize light stands or set walls.
Availability: Special Order
Godox
MFR Part #: 304
Samy's Part #: S-053068

The Godox Light Stand (6.5 ft.) is designed for maximum support with minimum weight. It is perfect for professional studio photography, easy to set up, quick release and lock system fitted for the fast and easy uses. The light stand extends up to 6.5 ft. and folds down to 27.5 inches. It features...
Availability: In Stock
Ships next business day
$1900
QTY
Phototools
MFR Part #: YA052
Samy's Part #: S-044776

The Phototools 3 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
Ships next business day
$799
QTY
Smith Victor
MFR Part #: 701225
Samy's Part #: S-056275

The Smith Victor
Tri-Pack Studio Weight Bag is a lightweight, handy way to stabilize light stands, boom arms, tripods, and other grip gear. The durable bag has three compartments that hold six easily sourced water bottles, while its reverse side has zippered pouches to hold additional weighty...
Availability: In Stock
Ships next business day
$2995
QTY
GTX Studio
MFR Part #: Z-LS08
Samy's Part #: S-052116

The Zuma 8ft. Light Stand (Black) is steel made for durability that can handle 10 pounds of weight. The light stand features adjustable, secure locking system and ideal for portable. The light stand is great for light and medium weight strobes, flash units, LED lights, reflectors and softboxes....
Availability: In Stock
Ships next business day
$1995
QTY
STUFFT
MFR Part #: SHOTBAG15
Samy's Part #: S-033997

The STUFFT 15 lb Shot Bag is encapsulated in inner poly bag embroidered with "shot" and weight in pounds custom embroidery. The bag is used to stabilize light stands or set walls.
Availability: Special Order
Manfrotto
MFR Part #: 425B
Samy's Part #: MANF425B

Largest boom in the range, remote control of pan, tilt and rotation of laminar plus geared telescopic extension. Combination of black zinc steel and black anodized aluminum tubes.
Availability: More In Transit
$98688
QTY
Matthews
MFR Part #: B389788
Samy's Part #: MATTB389788

Designed primarily for their use in lighting kits these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting...
Availability: In Stock
Ships next business day
$7840
QTY
Matthews
MFR Part #: H386022
Samy's Part #: MATTH386022

Junior & Senior Stands: Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8" Posi-V-Lock female with pop up 5/8" male receiver....
Availability: In Stock
Ships next business day
$31440
QTY
Matthews
MFR Part #: 427006
Samy's Part #: MATT427006

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: Special Order
$16400
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 249564
Samy's Part #: S-041939

The Matthews Mini Slider Stand (38 In.) features Steel Tubes, Aluminum Legs (type 3 hard black anodized), Military Black Chrome; and a Machined, Welded Junior Receiver. It is ideal for low angle shooting with heavy lights and accessories, supports up to 80 lb. it is very strong but folds down to...
Availability: In Stock
Ships next business day
$25075
QTY
STUFFT
MFR Part #: SAMSH15
Samy's Part #: S-053670

The
STUFFT Cinema Works 15 lb Shot Bag is used for securing the bases of light stands and set walls. The shot bags are useful to balance the light stands. The sand bag has a hand strap for easy handling and hanging on hooks. It is made of high quality material for longer use in hard weather.
Availability: Special Order
Matthews
MFR Part #: 209495
Samy's Part #: MATT209495

The Matthews Foam Core Holder is manufactured with a pivoting ball that locks for easier adjustment of the foam core or bead board that you tape onto the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set.
Availability: In Stock
Ships next business day
$4995
QTY
Matthews
MFR Part #: 427802
Samy's Part #: MATT427802

The Matthews Mini Boom (Chrome) is designed to resist bending when a constant array of accessories are added to small lighting fixtures or strobes. It mounts on a 5/8" stud, and will extend 7', terminating in a 5/8" mounting stud. Steel construction. A hooked end provides a place to hang a...
Availability: In Stock
Ships next business day
$19000
QTY
Manfrotto
MFR Part #: 025BS
Samy's Part #: MANF025BS

The Manfrotto 025BS Super Boom features coaxial geared controls at the end of the boom, which permits movement of 180 degree. The 008BU (a.k.a 3071B) two section stand has black painted aluminum construction, with wheels. The stand section supports light fixture loads up to 66 lbs (30kg), to a...
Availability: In Stock
Ships next business day
$67488
QTY
Notice: This item is non-returnable
Avenger
MFR Part #: D244N
Samy's Part #: S-052346

The Manfrotto Variable Friction Arm is fitted with large knob to lock all 3 movements. The Arm is a fully articulated accessory with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360° using a rubberized T-handle. The handle is used to control tension via partial loosening for...
Availability: In Stock
Ships next business day
$9999
QTY
Manfrotto
MFR Part #: 244MINI
Samy's Part #: S-040051

The Manfrotto 244MINI Friction Arm is a versatile 24cm (9.4 ") friction arm with 1 /4" attachments on both ends and additional 3/8'' adapter included. Attachments can easily be replaced by using the included hex key and are compatible with a range of different adapters.

Features:
  • Versatile
...
Availability: More In Transit
$10988
QTY
Manfrotto
MFR Part #: MS0490A
Samy's Part #: S-031862

The Manfrotto Nanopole Stand is a new lightweight stand, with a payload of 1,5Kg and outstanding stability. It's a two-in-one product: the central column is detachable and easily turns into a hand held boom. To detach the pole from the stand it's easy and fast: simply press the button with the...
Availability: Special Order
Matthews
MFR Part #: 339763
Samy's Part #: MATT339763

The Matthews Back Light Stand is configured so that accurate positioning of the back light may be achieved. Used for either background illumination or back lighting the subject. An extendable column allows for a wide range of heights and an interchangeable 5/8" pin positions the light almost...
Availability: In Stock
Ships next business day
$6900
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]