CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Phototools
MFR Part #: YA052
Samy's Part #: S-044776

The Phototools 3 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
Order by 1:00pm PST to ship today
$799
QTY
Kupo
MFR Part #: KG300912
Samy's Part #: S-019040

This tiny clamp is a grip arm's best friend! It consists of a 1/4"-20 male thread on one side and a small receiver to accept any stud or tubing up to 5/8" (16mm) in diameter. This is the perfect accessory to mount monitors, off camera flashes, etc.
Availability: In Stock
$1100
QTY
Phototools
MFR Part #: YA056
Samy's Part #: S-034614

The Phototools Adjustable Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.
Availability: In Stock
Order by 1:00pm PST to ship today
$1999
QTY
Matthews
MFR Part #: 429618
Samy's Part #: MATT429618

Both the Baby Pipe Clamp and the Junior Pipe Clamp have a uniquely designed hook molded into the clamp which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8? Pin with a safety chain and cotter pin attached....
Availability: Special Order
Matthews
MFR Part #: 420210
Samy's Part #: MATT420210

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design, reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has fixed...
Availability: More In Transit
$4500
QTY
Manfrotto
MFR Part #: 175
Samy's Part #: MANF175

Clamps onto bars or flat surfaces up to ° 1.5". Attachment via a 5/8" socket and 5/8" male stud

* Replaces item # 2936
Availability: In Stock
Order by 1:00pm PST to ship today
$1795
QTY
Kupo
MFR Part #: KG500611
Samy's Part #: S-019054
The Adjustable Gaffer Grip from Kupo is a quick-mount, multi-purpose steel clamp that will grab on most surfaces flat or round. The clamp has one fixed baby 5/8-inch stud and one reversible baby 5/8-inch stud with both 1/4"-20 and 3/8"-16 threads on either side. The reversible stud is mounted...
Availability: In Stock
$3595
QTY
Notice: This item is non-returnable
Manfrotto
MFR Part #: 035RL
Samy's Part #: MANF035RL

The Manfrotto 035RL Super Clamp can be securely mounted on any tube from .5" to 2.1". Supplied with a unique wedge insert for clamping onto flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures. The Super Clamp is a very...
Availability: In Stock
Order by 1:00pm PST to ship today
$2902
QTY
Kupo
MFR Part #: KG701611
Samy's Part #: S-037274

The Kupo Convi Clamp With Hex Stud (Black) is more than just an amazing clamp; it's the foundation of an entire grip system.

The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi...
Availability: In Stock
Order by 1:00pm PST to ship today
$2795
QTY
Avenger
MFR Part #: C4462
Samy's Part #: S-052345

The Avenger MP Coupler with 5/8" (16 mm) Spigot is a regular clamp to use on pipes or trusses. Made from aluminum alloy, it can be tightened with a wing nut and has a 16mm spigot for mounting lights and other accessories. It can support a payload up to 500kg and works on pipes ranging from 42mm...
Availability: In Stock
Order by 1:00pm PST to ship today
$2795
QTY
Matthews
MFR Part #: 540011
Samy's Part #: MATT540011

The Double Super Mafer allows the use of two Mafer attachments with one clamp. The castings and the reformulated protective pads in the jaws are now strong enough for us to be able to make this Double Super Mafer Clamp. Use a Hollywood Superflex Arm at one end and a 5/8" Baby Pin with a light...
Availability: In Stock
Order by 1:00pm PST to ship today
$4950
QTY
Kupo
MFR Part #: KG701212
Samy's Part #: S-019059

The Kupo Convi Clamp (Silver Finish) is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories...
Availability: In Stock
$2495
QTY
Notice: This item is non-returnable
Audio-Technica
MFR Part #: AT8410A
Samy's Part #: AUDIAT8410A

The Audio-Technica Shock Mount - Spring Loaded fits with Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, S11, SG1, SG2, SG3, SG4, T1, T2, T3, T4, T5, T6, T7

Features:
  • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
  • Spring-clip fits most
...
Availability: Special Order
$4900
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 425157
Samy's Part #: S-004653

The Matthews Baby Grid Clamp is made to clamp securely on overhead grids, car rigs or camera car rails for the mounting of light fixtures. Can be inverted with the pin mounting into a Grip Head for spanning pipe between 2 stands.
Availability: In Stock
Order by 1:00pm PST to ship today
$5200
QTY
Avenger
MFR Part #: C4461
Samy's Part #: S-040059

The 
Avenger MP Coupler with 1 1/8" (28mm) Spigot is perfect for using with pipes or trusses. Made from aluminum alloy, it can be tightened with a wingnut and has a 28mm spigot for mounting lights and other accessories. It can support a payload up to 500kg and works on pipes ranging from 42mm to...
Availability: In Stock
$3088
QTY
Dot Line
MFR Part #: DL4001P
Samy's Part #: S-024781

The new, economical Dot Line Corp. Table Top Tripod Clamp Combo is a composite material clamp that features locking metal legs that fold up out of the way when not in use. The feet of the legs are a composite material to help protect surfaces. The ball head rotates 360° and tilts 90°. The jaw...
Availability: In Stock
Order by 1:00pm PST to ship today
$1195
QTY
Phototools
MFR Part #: YA051
Samy's Part #: S-034613

The Phototools 2 inch A Clamp is strong, rust-resistant and durable. A Clamps have hundreds of uses on set including holding reflector boards, gathering cloth backgrounds and drapes, securing a roll of seamless paper to its crossbar and on and on. Plastic tips on the A Clamps pinchers help
...
Availability: In Stock
Order by 1:00pm PST to ship today
$499
QTY
Phototools
MFR Part #: MC1054
Samy's Part #: S-053245

The Phototools Micro Clamp can grip to round or flat surfaces, as well as many other objects or shapes. It's reduced size and dual 3/8" and ¼" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an aluminum
...
Availability: In Stock
Order by 1:00pm PST to ship today
$1299
QTY
Matthews
MFR Part #: 429620
Samy's Part #: MATT429620

A cheeseboro clamp with a 1-1/8" pin attached to it serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4" to 3-1/4" as a temporary overhead grid.
Availability: In Stock
Order by 1:00pm PST to ship today
$6100
QTY
Matthews
MFR Part #: 420100
Samy's Part #: MATT420100

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has a fixed...
Availability: In Stock
Order by 1:00pm PST to ship today
$6100
QTY
Dot Line
MFR Part #: DL-3103
Samy's Part #: S-051067

The versatility of the Dot Line Corp. Super Clamp For Seamless Backgrounds is equaled only by its durability and is used to clamp the seamless background papers. An item to have on hand at all times, the Super Clamp can be clamped to anything of 1.75 inches. The Super Clamp can also accept a s...
Availability: In Stock
Order by 1:00pm PST to ship today
$295
QTY
Manfrotto
MFR Part #: 386B
Samy's Part #: MANF386B

The Manfrotto Nano Clamp is smaller in size than the popular Super Clamp and is even more versatile. Its reduced size is the most important plus, and at just 3.87 ounces, the Nano Clamp has a capacity of 12.13 pounds. The Nano Clamp has both 3/8" and ¼" attachments to make it compatible with...
Availability: In Stock
Order by 1:00pm PST to ship today
$3741
QTY
Avenger
MFR Part #: C1000
Samy's Part #: AVENC1000

The Avenger C1000 Drop-Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" (Baby) stud.
Availability: More In Transit
$899
QTY
Matthews
MFR Part #: 350617
Samy's Part #: S-015212

The MicroClamp can grip to round or flat surfaces, as well as many other objects or shapes one may find on set. It's reduced size and dual 3/8" and ¼" mounting holes give it extreme flexibility. Its strength is derived from a precision aluminum extrusion, it's high performance stick pads and an...
Availability: In Stock
Order by 1:00pm PST to ship today
$2320
QTY
Kalt
MFR Part #: PD05020
Samy's Part #: KALTPD05020

For mounting a camera, or small light fixture that has a 1/4-20 inch screw threaded bottom. The Ultra Clamp Assembly locks and tightens to any side car window, shelf or arm up to 1-1/2 inch thickness. Includes a locking 2 way swivel/tilt head.
Availability: In Stock
$2995
QTY
Matthews
MFR Part #: 541004
Samy's Part #: MATT541004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added. Comes with...
Availability: In Stock
Order by 1:00pm PST to ship today
$3600
QTY
Profoto
MFR Part #: 101081
Samy's Part #: S-039081

TheProfoto Pivoting Clamp for 5 ft. or 7 ft. Reflector is a pivoting clamp for use with a 5 ft. or 7 ft. reflector. Pivoting clamp for 35mm diameter boom shafts. 1-1/8" male, and 5/8" female receptor.
Availability: In Stock
$19595
QTY
Notice: This item is non-returnable
Manfrotto
MFR Part #: 038
Samy's Part #: S-037193

The Manfrotto  038 Double Super Clamp is a set of two super clamps fastened together at fixed right angle to provide extra strength support for tubes or bars. The clamps are made of lightweight cast alloy, fastened together at a 90 degrees angle. Clamps on tubes 1/2 to 2-1/8 inches in diameter....
Availability: In Stock
$5988
QTY
Notice: This item is non-returnable
Manfrotto
MFR Part #: MC1990A
Samy's Part #: S-031319

The Manfrotto "Pico Clamp" is an extra-small clamp with versatile use. It is a great tool for mounting portable strobes, cameras, LED light panels, audio recorders, or just about any other piece of low-weight gear that comes equipped with standard 1/4'' or 3/8'' attachments.

Manfrotto "Pico Clamp"...
Availability: In Stock
Order by 1:00pm PST to ship today
$2988
QTY
Notice: This item is non-returnable
Phototools
MFR Part #: YA047
Samy's Part #: S-034612

The Phototools Mini Clip Clamp is a versatile clamp that can accept a light head with a 5/8" receptor or a stud. It can also be mounted on 16mm extension arms.
Availability: In Stock
Order by 1:00pm PST to ship today
$1699
QTY
Matthews
MFR Part #: 420112S15
Samy's Part #: MATT420112S15

The Mini Matthellini Clamp is a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands. The Mini-Matthellini Clamps are half...
Availability: More In Transit
$4240
QTY
Matthews
MFR Part #: 540004
Samy's Part #: MATT540004

Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Availability: In Stock
Order by 1:00pm PST to ship today
$2880
QTY
Matthews
MFR Part #: 420110
Samy's Part #: MATT420110

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has a fixed...
Availability: In Stock
Order by 1:00pm PST to ship today
$5600
QTY
Matthews
MFR Part #: B541004
Samy's Part #: MATTB541004

The Matthews Super Mafer Clamp with 5/8 in. Pin is strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength...
Availability: In Stock
Order by 1:00pm PST to ship today
$3740
QTY
Matthews
MFR Part #: 417026
Samy's Part #: S-025427

The Matthews 4.5 In. Vacuum Cup with 5/8 In. Pin has 5/8 inches pins, in single and double configurations. The 10 inches Pump Cup is a heavy-duty style without 5/8 inches pins. Pump it until the red marker disappears to create an amazing bond to nonporous surfaces. A common use is for camera shots...
Availability: In Stock
Order by 1:00pm PST to ship today
$5499
QTY
Matthews
MFR Part #: 420101
Samy's Part #: MATT420101

Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. The differences are: A ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2” or 3” Center Jaw or 2” End Jaw. The Center Jaw has a fixed...
Availability: In Stock
Order by 1:00pm PST to ship today
$4500
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]