CONTACT US AT 800-321-4726
MFR Part #: CP.RN.00000033.01
Samy's Part #: S-061073
Whereas the standard DJI Ronin-S comes with a focus wheel, control cables, a power adapter, and other accessories, the DJI Ronin-S Essentials Kit includes the gimbal and the key accessories required to go out and begin shooting. There's a difference of only several accessories, accompanied by...
Availability: In Stock
MFR Part #: CP.RN.00000020.01
Samy's Part #: S-060871
The DJI Ronin-S Multi-Camera Control Cable (Sony Multi Port) allows you to connect your Sony camera to the Ronin-S camera control port to let you control the camera via the Ronin-S camera control button.
Availability: In Stock
MFR Part #: YUNCGOSTG100
Samy's Part #: S-036644
The CGO SteadyGrip is a ground handle designed to extend the Q500 Typhoon's CGO-GB 3-axis gyro stabilized camera from the sky to the ground.
The CGO SteadyGrip? allows you to capture amazing action shots easier than ever before. The camera pitch controller allows precise camera angle control while...
The CGO SteadyGrip? allows you to capture amazing action shots easier than ever before. The camera pitch controller allows precise camera angle control while...
Availability: In Stock
MFR Part #: CP.ZM.000136
Samy's Part #: S-034797
The DJI Dovetail Mounting Plate B for Ronin (with universal groove and camera screws) is a sliding plate required when mounting certain cameras to the gimbal.
MFR Part #: CP.ZM.000370
Samy's Part #: S-045866
The DJI Osmo Intelligent Battery is designed specifically for the Osmo, the Intelligent Battery provides pack of 980mAh of power with intelligent battery-saving features. Recharge using the Osmo Intelligent Battery Charger.
Features:
- A high-performance intelligent flight battery
- Specifically
Availability: In Stock
MFR Part #: CPMA00000059.01
Samy's Part #: S-058719
These next-generation propellers adopt a brand new aerodynamic design, which results in quieter flight, increased efficiency, and extended flight time.
Availability: In Stock
MFR Part #: CP.IS.000004
Samy's Part #: S-035059
The DJI iOSD Mini on Screen Display is specially designed for a DJI autopilot system and it should be used with either WooKong-M, Naza-M or Naza-M V2. It can transmit video and iOSD information in real-time, which will help you to obtain the Quadcopter status information during first-person view...
Availability: In Stock
MFR Part #: CP.PT.000562
Samy's Part #: S-048404
The DJI Mavic Car Charger is used to charge the Intelligent Flight Battery through a car's cigarette lighter port. It comes with low-voltage protection to ensure enough starting battery voltage for the car. Overheating protection will automatically cut off charging if your cigarette lighter port...
Availability: In Stock
MFR Part #: AGMSS-001
Samy's Part #: S-048791
Combine the GoPro Karma Grip Handle with the Karma Stabilizer to capture breathtaking shake-free video with your GoPro. Enjoy professional, cinema-quality footage whether youre hiking, biking or chasing your kids through the park. Works with most GoPro mounts to capture the amazing handheld, g...
Availability: In Stock
MFR Part #: CP.ZM.000374
Samy's Part #: S-049567
The DJI Grip for Ronin-M Ronin-MX is a dual handgrip, used to hold a Ronin-M or Ronin-MX more easily and lean it against vertical surfaces when not in use. The grip is also useful for different carrying styles and passing the Ronin between camera operators. It could be personalized with Expansion...
Availability: In Stock
MFR Part #: CP.ZM.000384
Samy's Part #: S-045242
The DJI Remote Start/Stop is designed to be used with a Ronin series gimbal or DJI Focus to control the camera for video recording or taking photos. When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record...
Availability: In Stock
MFR Part #: 4597
Samy's Part #: S-041848
The Promaster Quadcopter Filter Kit for DJI Phantom 3 is specifically made for use with the Phantom 3 Professional and Advanced models. The kit includes 3 filters, metal lens cap for protection and a storage case. The set of filters consists on a UV protection filter, circular polarizer, and a...
Availability: In Stock
MFR Part #: CP.BX.000087
Samy's Part #: S-041471
When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1's standard Zenmuse X3 camera. The DJI Zenmuse X5 Vibration Absorbing Board is made from shock-resistant magnalium which effectively absorbs vibrations.
Note: The...
MFR Part #: CP.MA.00000037.01
Samy's Part #: S-058699
The DJI Mavic 2 Fly More Kit includes two Intelligent Flight Batteries, a Mavic 2 Car Charger, a Battery Charging Hub, a Battery to Power Bank Adapter, Low-Noise Propellers, and a Mavic 2 Shoulder Bag, providing you with comprehensive support during shooting.
Both Intelligent Flight Batteries
...Availability: On Backorder
MFR Part #: CPPT0000002021
Samy's Part #: S-056956
Specially made for the Mavic Air. This set includes ND4, ND8 and ND16 filters. ND filters reduce the amount of light coming into the sensor, giving you the freedom to create your work by allowing more control of the camera's aperture, exposure time and sensor sensitivity settings. Put more simply;...
Availability: In Stock
MFR Part #: P4P-LC
Samy's Part #: S-055722
The Polar Pro DJI Phantom 4 Pro Lens Cover provides an easy to install solution to protect your camera's lens and gimbal. The lens cover simply pushes onto the gimbal and camera to provide protection while traveling. Designed specifically for use with PolarPro Phantom 4 Pro filters, the lens cover...
Availability: In Stock
MFR Part #: GPCDJIOSMO1
Samy's Part #: S-044297
Tired of turning off your Osmo everytime you need to put it down? Do you have an extension stick or tripod? We designed the new the Go Professional Cases DJI OSMO X3 Case to accommodate both with and a special cavity that gives you the ability to stand the Osmo up during set up or during temporary...
Availability: In Stock
MFR Part #: AGMBL-001
Samy's Part #: S-048789
Capture amazingly smooth shake-free video. The detachable GoPro Karma Stabilizer gives you the versatility to tell your stories in a whole new way. Use it with the Karma Drone for ultra-steady aerial shots. Attach it to Karma Grip to smooth out the bumps in your handheld and gear-mounted shots....
Availability: In Stock
MFR Part #: CP.ZM.00000083.01
Samy's Part #: S-055767
The DJI Osmo Mobile 2 Part 1 Base is used to fix the Osmo on tables or other level surfaces so that it remains stable without tipping over.
Availability: On Backorder
MFR Part #: CP.ZM.000524
Samy's Part #: S-054989
The DJI Focus Handwheel 2 for Inspire 2 and Osmo is especially optimized to precisely control aperture, focus or zoom on Inspire 2 and Osmo Pro/RAW cameras conveniently. The precise adjustments without vibration are made possible with it.
MFR Part #: 420
Samy's Part #: S-049930
Efficiently transport and access your quads and all essential gear so you can focus on racing and not on keeping track of your gear.
FEATURES:
Fits 2-3 quads on the front of the backpack or with props removed, 2-3 on the inside of the backpack
Interior fits a radio transmitter, FPV goggles, 8-15...
MFR Part #: CP.ZM.000378
Samy's Part #: S-049565
A High Capacity Osmo Intelligent Battery reaches 1225mAh (14.1Wh) and 11.55V. Use a DJI charger to recharge intelligent batteries
Availability: In Stock
MFR Part #: CP.MA.00000038.01
Samy's Part #: S-058700
Replace your dead batteries or stock up for long shoots with the DJI Intelligent Flight Battery for Mavic 2. This battery has a 3850mAh and 59.29Wh capacity that delivers enough power for up to 31 minutes of flight time. Built into the battery is DJI's Intelligent Battery Management System. This...
Availability: On Backorder
MFR Part #: cpma0000006101
Samy's Part #: S-058714
The DJI Gimbal Protector for Mavic 2 Pro is designed to protect the gimbal and the Hasselblad 20MP camera from impacts, dust, water, and debris when the drone is flying or during transport. Please note that the gimbal protector will need to be removed if full gimbal movement is desired during...
Availability: In Stock
MFR Part #: MVC-CS-6-PCK
Samy's Part #: S-050656
Included in this Polar Pro DJI Mavic Cinema Series 6-Filter Pack is both the Cinema Series Vivid Collection and Shutter Collection. The Vivid and Shutter Collections are part of PolarPro’s Cinema Series line featuring the highest-grade glass and coatings, delivering perfect optics. The Cinema Series...
Availability: In Stock
MFR Part #: CP.BX.000222
Samy's Part #: S-053143
Created for outdoor aerial imaging, the DJI CrystalSky High-Brightness Monitor (5.5 In.) features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control. A maximum 2000...
MFR Part #: CP.ZM.000301
Samy's Part #: S-046865
The DJI Ronin Series Battery Power Distributor is designed for the Ronin series hand-held gimbals, this Battery Power Distributor has a P-Tap power connector that can supply power to the gimbal and other onboard devices (such as a RED camera). The power connector is easy to connect and remove....
MFR Part #: CP.BX.0000021
Samy's Part #: S-054990
The DJI Inspire 2 180 W Battery Charger (Without AC Cable) charges the Inspire 2 remote controller and battery using AC power. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 remote controller. When charging both devices...
Availability: In Stock
MFR Part #: IB-18650-26
Samy's Part #: S-046933
The ikan Lithium-Ion Battery (3.7V, 2600mAh) is a lithium series battery, perfect for gimbals operation and LED lights. It features integrated overcharging / discharging protection circuit which makes it long life. Each battery is factory tested for quality and serviceability. It produces 3.7...
Availability: In Stock
MFR Part #: CP.MA.00000039.01
Samy's Part #: S-058701
The DJI Battery Charger for Mavic 2 can recharge both the battery for the Mavic Air and the remote controller via the main output. A secondary USB output is available for charging your mobile device or smartphone. This replacement charger does not include an AC cable, and requires one for connecting...
Availability: In Stock
MFR Part #: GPC-DJI-RONIN-M
Samy's Part #: S-044672
The Go Professional Cases Hard Case for Ronin-M Gimbal & Accessories is for the filmmakers needing quick deployment! The GPC Ronin-M case allows you to only have to break down into only 4 easy pieces. Setup time is drastically reduced, because the gimbal stays in balance from the last shoot even...
MFR Part #: CP.BX.000099
Samy's Part #: S-050213
Meet the DJI Zenmuse X5 Camera and 3-Axis Gimbal, the world's first mirrorless, compact Micro Four Thirds camera made specifically for aerial photography and cinematography. Designed to work with the DJI Inspire 1 ready-to-fly platform, the ZENMUSE X5 packs a powerful sensor that's capable of recording...
MFR Part #: MVC-5001
Samy's Part #: S-050657
The Polar Pro Filter Kit for DJI Mavic Pro (3-Pack) includes a Circular Polarizer filter for reducing glare and increasing color saturation, an ND8 filter for reducing shutter speed for partly cloudy days, and an ND16 filter for filming on sunny days. Each neutral density filter for the DJI Mavic helps...
Availability: In Stock
MFR Part #: BLH7820B
Samy's Part #: S-032246
The Horizon Hobby CW and CCW Rotation Propeller Set for 350 QX Quadcopter includes one clockwise propeller and one counterclockwise propeller. Easy to replace the propeller set is a must have just in case a propeller gets damaged.
Availability: In Stock
MFR Part #: MVC-CS-SHUTTER
Samy's Part #: S-050655
The Polar Pro Shutter Collection DJI Mavic Cinema Series 3-Filter Pack is part of PolarPro’s Cinema Series line. Featuring the highest grade glass and coatings delivering perfect optics. The Cinema Series is for pilots who demand the absolute best. The Cinema Series for the DJI Mavic feature an aluminum...
Availability: In Stock
MFR Part #: ZH33DPART42
Samy's Part #: S-037709
The DJI ZH3-3D Damping Rubber Set is used to connect the camera mounting plate and the gimbal while decreasing vibration effects.
Features:
- Connects the camera mounting plate and the gimbal
- Decreases vibration effects
Availability: In Stock
Notice: This item is non-returnable
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE