CONTACT US AT 800-321-4726
Shop By Category
Filter By
No Sales Tax
FOUND: 0
SORT BY:
# PER PAGE:
Tilta
MFR Part #: TABSP15
Samy's Part #: S-066389

The Tilta 15mm LWS Baseplate Type II (Tilta Gray) easily slides onto the base of the Tiltaing half and full camera cages for Sharp 8K, Panasonic GH, Fuji XT3, Nikon Z6/Z7, Sony a6, and Sony a7/a9. It provides 15mm LWS rod holders to allow you attach rod-based accessories and is compatible with
...
Availability: More In Transit
$11900
QTY
Visual Union
MFR Part #: QBS
Samy's Part #: VISLQBS

With The Visual Union Quick Box Small, your wireless receiver is protected from the elements in this felt lined aluminum box. A stainless steel spring clip secures the receiver in place. Quick Boxes can be "stacked" next to each other to hold additional wireless receivers. Will fit all our Bracket...
Availability: In Stock
$3400
QTY
Visual Union
MFR Part #: QP
Samy's Part #: VISLQP

This Quick Plate is a universal accessory mounting adapter, a low cost solution for attaching your wireless receiver, hard disk recorder, or other audio accessories to the Bracket 1 bracket system or any camera with the industry standard mounting pattern. Quick Plate firmly holds the receiver...
Availability: In Stock
$2995
QTY
Notice: This item is non-returnable
Steadicam
MFR Part #: 8017902
Samy's Part #: STEA8017902

This Steadicam Custom-Fitted Merlin Travel Case allows an operator to securely stow a mounted and balanced camcorder on the Merlin stabilizer in order to be ready for the next shot when working in changing conditions. Ample room is provided to store ancillary equipment, and the durable outer shell...
Availability: Special Order
$9995
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Delkin Devices
MFR Part #: DDMOUNTSUCTION
Samy's Part #: S-000438

Delkin's newest DIMA Award winning accessory is the Fat Gecko camera mount. The Fat Gecko Dual Suction Cup Mount that allows all photo and video enthusiasts to quickly and easily create photos and videos in any situation. The Fat Gecko suction cup mount allows users to secure cameras to motor...
Availability: More In Transit
$6995
QTY
Contour
MFR Part #: 2250
Samy's Part #: S-002319
The Flat Surface Adhesive Mount Replacement are replacement Adhesive Pads to remount your ContourHD Flat Surface Mount. It works best on flat, non-porous, clean surfaces.

Please Note: Old inventory, New but packaging may show signs of age.
Availability: In Stock
$300
QTY
Delkin Devices
MFR Part #: DDMOUNTMINI
Samy's Part #: S-002367

The Fat Gecko Mini uses the unbelievable strength of locking suction and a universal mounting screw to securely attach any standard camera or camcorder to the vehicle or object of your choice. The Fat Gecko Mini is ideal in situations where size and weight are critical, especially in extreme sports where...
Availability: In Stock
Ships next business day
$2995
QTY
Redrock Micro
MFR Part #: 20540004
Samy's Part #: S-003396
The 1.5" Micro Arm Short (Black) from Redrock Micro is an adjustable articulating arm for attaching and positioning accessories onto your camera rig. The microArm has 1/4" 20 male screws on each end. The complete articulating knob tightens with a single knob. Finished in anodized metal. Short...
Availability: In Stock
$4900
QTY
Redrock Micro
MFR Part #: 32000005
Samy's Part #: S-003398

MicroLensGear size B 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 211mm-250mm. Comes with large and small fastening screw sizes.
Availability: In Stock
$4450
QTY
Redrock Micro
MFR Part #: 32000006
Samy's Part #: S-003399
MicroLensGear size C 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 241mm-280mm. Comes with large and small fastening screw sizes.
Availability: In Stock
$4450
QTY
Redrock Micro
MFR Part #: 32000007
Samy's Part #: S-003400

MicroLensGear size D 0.8 film pitch mod 32 provides film-pitch gearing for 35mm still lenses. The A gear fits lens focus rings with a circumference of 280mm-320mm. Comes with large and small fastening screw sizes. Size D is often used for gearing video camera lenses, such as the Panasonic AG-HVX200...
Availability: In Stock
$4450
QTY
Redrock Micro
MFR Part #: 80110006
Samy's Part #: S-003548

All new design and manufacturing process, the Redrock carbon fiber rods are precision crafted 15mm support rods. Carbon fiber rods are 66% less weight than stainless steel and incredibly rigid.
Availability: In Stock
$6400
QTY
Notice: This item is non-returnable
Zacuto
MFR Part #: ZRSM12
Samy's Part #: S-003816

12 Inch Rods, Female Threaded on both ends. 1 set comes included with all Zacuto Universal Baseplates Our rods are all lightweight; 15mm diameter with 60mm spacing and clear anodizing. They are made out of 6061 aluminum and the threads are ½” 13.
Availability: In Stock
$8075
QTY
Notice: This item is non-returnable
Redrock Micro
MFR Part #: 80030015
Samy's Part #: S-004662

Professional grade, lightweight stainless steel precision machined. Two 18" rods, industry standard 15mm diameter. Rods are designed to fit the microRodSupport Base Plate.
Availability: In Stock
$9900
QTY
Notice: This item is non-returnable
Zacuto
MFR Part #: ZZNG
Samy's Part #: S-005472

Zacuto's Zangle will give you another option in mounting your rods. With the zangle, you can attach rods at a 90 degree angle to fit your custom rigging needs as in building a cage or DSLR handle! There are two 15mm holes that accept a female end of a rod. Using an included allen key, simply loosen...
Availability: In Stock
$1900
QTY
Dot Line
MFR Part #: DLV5
Samy's Part #: S-013716

This ultimate rig for the new hybrid DSLR's that have HD video and camcorders makes getting the shot easy. This rig is designed to be used in a variety of configurations to suit the shooting situation and the preferences of the photographer. It can be set to have the grips upward; or one up and...
Availability: In Stock
Ships next business day
$8499
QTY
Varizoom
MFR Part #: VZCROSSFIREFP
Samy's Part #: S-014151

The VariZoom CrossFire FP Multimode Stabilizer and Tripod System includes the stabilizer with removable tripod and quick-release camera plate, carrying case, 2 stainless inline counterweights, 2 sliding stainless ring counterweights, microweights, and a balancing plate. You are provided with a...
Availability: In Stock
$17900
QTY
Varizoom
MFR Part #: VZFPMINI
Samy's Part #: S-014164

The VZ-FP-MINI is a smaller version of the award winning FlowPod series. The key differences are a much lighter body designed to accommodate todays smaller point & shoot cameras as well as small compact DSLR's such as the Canon T1, T2 and similar size cameras that weight 1.6lbs or less. While...
Availability: In Stock
$9900
QTY
Redrock Micro
MFR Part #: 80170003
Samy's Part #: S-014313

The 8" Handlebar Rod from Redrock Micro adds a 15mm 8" rod to the Handlebar Clamp. It features an anti-rotation locking mechanism and attaches with a standard hex screw.
Availability: In Stock
$2250
QTY
Notice: This item is non-returnable
Dot Line
MFR Part #: PCPD1
Samy's Part #: S-014438

The very affordable Dot line Pico Dolly gives a stable platform for smaller video productions. Made of aluminum and rollerblade type wheels with high quality ball bearings, the 3-1/2 inch wide dolly features three 1/4-20 female thread positions for mounting optional ball heads or articulating...
Availability: Special Order
Dot Line
MFR Part #: DLV1
Samy's Part #: S-014705

The Dot Line Magic Rig V1 for HDSLR Cameras is a lightweight support rig for a DSLR camera or compact camcorder. With a height-adjustable baseplate and a quick-release plate with a 1/4"-20 stud, the Magic Rig V1 will accommodate most cameras.

Providing two points of contact for one-armed operation,...
Availability: Special Order
Cinevate
MFR Part #: ATLAS30RLWB47
Samy's Part #: S-015314

The Cinevate Inc Atlas 30 47" Slider with Regular Legs is a linear tracking system that can bear a load up to 30 lb (13.61 kg). It is made from a single block of aluminum and is supported by 5/8.

Features:
  • Linear Tracking System
  • Can Bear Load up to 30 lb (13.61 kg)
  • Made from a Single Block
...
Availability: In Stock
$79900
QTY
Notice: This item is non-returnable
Cinevate
MFR Part #: CIDSLR000004
Samy's Part #: S-015317

Need an extra grip for your Cinevate Uno, Medusa or Proteus DSLR system? This grip can be mounted, and configured nearly anywhere on your rig. A single "Kip" handle allows you to toollessly adjust the grip in virtually any direction, angle or rotation. Hidden under the grip is a female 1/4" 20...
Availability: In Stock
$14019
QTY
Notice: This item is non-returnable
Steadicam
MFR Part #: PILOTVLB
Samy's Part #: S-002789

The Steadicam 
Pilot-VLB Camera Stabilization System with Power is a state of the art, lightweight stabilizer system designed especially for the modern breed of lightweight cameras from 2 to 10 pounds. It features a 5.8" monitor, Iso-elastic Arm and ultra low profile vest, lightweight sled with...
Availability: In Stock
$3,29900
QTY
Redrock Micro
MFR Part #: 2-069-0001
Samy's Part #: S-008314

The Redrock Micro Nano Focus+Zoom Lever is an ingenious accessory that allows quick, easy, and precise adjustments to the focus and/or zoom on your 35mm lens. The nano focus+zoom works with the microLensGears (purchased separately) to exactly match your lens size, and attaches quickly and without...
Availability: In Stock
$1000
QTY
Notice: This item is non-returnable
Cam Caddie
MFR Part #: 0CC0100AC
Samy's Part #: S-008963

The Cam Caddie Scorpion Accessory Shoe is used to mount: microphones, led lights or any other device that you need for your next shoot. The unique design allows the Accessory Shoe to be used in a variety of different ways. It can be used individually to mount a microphone or LED light, or it can...
Availability: In Stock
Ships next business day
$1799
QTY
Cam Caddie
MFR Part #: 0CC0100AW
Samy's Part #: S-008964

The Cam Caddie Accessory Wing can be used in a variety of different ways. It can be used individually or it can be combined with our Accessory Wing to mount multiple items to the Cam Caddie Scorpion. This unique design provides a great deal of flexibility ensuring you can quickly switch your gear...
Availability: Special Order
$1999
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
JuicedLink
MFR Part #: DIY101B
Samy's Part #: S-011130

The JuicedLink DIY101B Accessory Bracket (Rectangular) is a mounting bracket that hosts a DSLR or other small videocamera and several accessories such as monitors, batteries, wireless audio receivers, etc. Composed of CNC-milled aluminum with a black anodized finish, the Accessory Bracket has...
Availability: In Stock
$5000
QTY
Delkin Devices
MFR Part #: DDMOUNT-STEALTH
Samy's Part #: S-016042

Secure your digital camera to the side of a helmet, atop your surfboard or onto any other smooth solid surface. This low profile suction cup guarantees a reliable hold for equipment up to 1lb (16oz) in strenuous environments where wind, vibration, g-force or rain may come into play. Adjustable...
Availability: In Stock
Ships next business day
$2295
QTY
Redrock Micro
MFR Part #: 180661105
Samy's Part #: S-016051

We don't really have the authority to hand out military ranks, but we're making an exception. Like Captains of other things (ships, space ships, industry), this rig goes where others wouldn't dare, and leads by example. The Stubling gets its name from its designer, DV Rebel and VFX guru Stu...
Availability: Special Order
K-Tek
MFR Part #: KTADM
Samy's Part #: S-016144

The K-Tek Mini Tadpole Camera Boom Pole (7.5") is a single-section boom pole designed for small cameras such as the iPhone and GoPro Hero. The pole is not extendable and is always 7.5" in length. It features a tilting ball and socket head which allows you to precisely position your small camera...
Availability: In Stock
$3000
QTY
Redrock Micro
MFR Part #: 2-028-0001
Samy's Part #: S-016298

The Redrock's MicroFollowFocus 19mm Adapter Clamp for the microFollowFocus v2 allows the microFollowFocus version 2 to be used on 19mm rods, such as those found on the Red digital cinema cameras and the Red ONE. The adapter clamp is a quick release system (Patent Pending) for easy on/off attachment,...
Availability: Special Order
$1,02250
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
GoPro
MFR Part #: ASURF001
Samy's Part #: S-016495
The GoPro Surfboard Mounts for GoPro HERO is the ideal mount for attaching your GoPro camera to a surfboard, paddle board, kayak, boat deck, and other water gear. They are compatible with all GoPro waterproof housings and features two mounts, two camera tethers, two tether straps, one FCS plug...
Availability: In Stock
Ships next business day
$1999
QTY
Dot Line
MFR Part #: DL-0375
Samy's Part #: S-016547

The new Dot Line Video Stabilizer with Grip and Quick Release is complete and economical featuring a fully adjustable camera mount allowing viewing through the viewfinder or via the LCD screen with padded shoulder and chest supports as well a padded hand grip under the camera platform that is...
Availability: Special Order
$4999
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Redrock Micro
MFR Part #: 21-066-0002
Samy's Part #: S-016588

The Redrock Micro's Studio Bundle for the Sony F3 series cameras is the perfect set of cinema accessories for studio and tripod work using this fantastic new camera from Sony. The Studio Bundle includes some of Redrock's most popular products. The microMatteBox Deluxe Bundle delivers light and...
Availability: Special Order
$2,36050
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Jag35
MFR Part #: CABTPH
Samy's Part #: S-015862

The Balanced Top Handle is designed to give you more adjustment allowing the user to achieve a better balanced rig. It consist of a 8″rod  with a rodclamp  at the end and a regular height adjustable handle  on the other end. Made in the USA using black Anodized Aluminum parts.
Availability: In Stock
$4900
QTY
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]