MFR Part #: 7000
Samy's Part #: S-051866
The Matthews 7000 Steel 1/4-20 Female Baby Pins is a steel constructed 1/4"-20 female baby pin.
Availability: Backordered
$1000
MFR Part #: KD302112
Samy's Part #: S-064957
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The drop ceiling mount also commonly called a scissor mount attaches to an intersection in the metal grid that supports the tiles. It remains a must have accessory for shooting in office buildings. The male...
Availability: In Stock
$950
MFR Part #: F830
Samy's Part #: AVENF830
This Avenger F830 Junior to Baby Swivel Pin adds articulation to your stand or boom. One end slips onto a male 5/8 in. pin while the other supports a light or accessory with a 5/8 in. receiver. The ball joint allows 180° swivel of the fixture, while the large handle provides secure locking in...
Availability: In Stock
MFR Part #: KG001112
Samy's Part #: S-064961
This round solid brass Baby 5/8" (16mm) stud is tapped with a 3/8"-16 female thread on one side and a 1/4"-20 female thread on the other. This is a replacement stud for the Tilting Umbrella Adapter (KG007012).
Availability: In Stock
$369
MFR Part #: KG014212
Samy's Part #: S-064977
Since most grip gear and lighting equipment uses a baby 5/8"(16mm) spigot or a junior mount 28mm (1 1/8") receiver, this accessory adds extra versatility to your gear.
Availability: Backordered
$2595
MFR Part #: 7459
Samy's Part #: S-054839
The Westcott 2 ft. Yoke for Flex LED Mat Scrim Jim Cine Frame is the studio solution for mounting Flex 1' x 1', 1' x 2', and 1' x 3' LED mats in conjunction with Scrim Jim Cine framework. This yoke is an ideal option for Flex Cine Kit users looking for a sturdy, long-term mounting method.
FEATURES:...
Availability: Special Order
MFR Part #: 122B
Samy's Part #: MANF122B
Extendable arm with double male spigot. Minimal height 48cm, maximal height 80cm.
Minimum Extension 21" (53 cm)
Maximum Extension 33.5" (85 cm)
Weight 1 lb (0.45 kg)
Attachment Size 5/8" male studs on each end, with 3/8" thread
Availability: Backordered
$4188
MFR Part #: YA095
Samy's Part #: S-034620
The Phototools Swivel Umbrella Adapter is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8". It requires an optional shoe for use of sho...
Availability: In Stock
$1999
MFR Part #: 426015
Samy's Part #: MATT426015
When a Baby Lighting fixture needs to be just a little higher the stand extension can be added to the top of the stand nail on plate or other hardware.
Availability: In Stock
$3700
MFR Part #: 101074
Samy's Part #: S-023795
The Profoto Pro Plus Standard Stand Adapter Plus is a replacement part for the one that comes with all standard Pro and Acute heads. It allows the head to be mounted on a light stand with an industry-standard 5/8" stud.
Availability: In Stock
MFR Part #: KG000112
Samy's Part #: S-064958
This Convi Clamp accessory has a hex stud on one side and a baby stud on the other for mounting light fixtures or any other piece of grip equipment or accessory with a baby receiver. These are generally bought by the handful and considered a must have item in grip bags. It has a Baby 5/8" (16mm)...
Availability: In Stock
$575
MFR Part #: LSB-PP
Samy's Part #: S-040733
The Dynalite Light Stand Bracket is used to mount Dynalite Road / RoadMax 400 or 800W/s power packs to light stand. The bracket is made of high quality material and has a 5.3 lb (2.4 kg) weight capacity.
Features:
- Used to mount power pack to light stand
- Made of best material
- Holds 5.3 lbs
Availability: In Stock
$1500
MFR Part #: YWA2020
Samy's Part #: S-034625
This set of three Phototools Wheels are 75mm diameter braked wheels with adapters for attaching to any light stand legs that are 22mm in diameter. The wheels slip onto the leg ends with sturdy metal housings and can be locked into place by stepping down on a locking lever, and released by lifting...
Availability: In Stock
$3900
MFR Part #: YWA25
Samy's Part #: S-034623
This set of Phototools locking casters are made for light stands with 25mm diameter legs. The casters slip over the end of the legs, and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$2900
MFR Part #: YWA22
Samy's Part #: S-034622
This set of three Phototools locking casters are made for light stands with 22mm diameter legs. The casters slip over the end of the legs and are locked into place by tightening a thumbscrew. The wheels can be locked by stepping down on a locking lever, and released by lifting the end of the...
Availability: In Stock
$2900
MFR Part #: A10
Samy's Part #: S-038452
The Aputure A10 Articulating Magic Arm is a 10 inch multi-function magic arm, which features a hyper-stable and reliable locking system. It can be easily locked at all joint activities and fix in more position. The locking a10 can help you to experience a hyper-stable, but flexible support system....
Availability: In Stock
$3500
MFR Part #: 30025
Samy's Part #: S-067241
The Matthews Gobo Plate is a versatile mounting adapter designed to interface with 2.5" grip heads and building materials such as lumber and metal studs. The plate features thoughtfully spaced holes for bolting on pins, tripod heads, and other camera accessories, as well as holes that allow the...
Availability: In Stock
$2900
MFR Part #: 244
Samy's Part #: MANF244
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with...
Availability: Backordered
MFR Part #: KG003512
Samy's Part #: S-064966
The Kupo Baby 3" Wall Plate allows you to mount a 3" (7.62cm) long Baby 5/8" (16mm) stud anywhere on a wall, other flat surface or just about anywhere. This plate gives you the option of mounting it by using screws or nails through any of the 8 anchor points pre-drilled into the plate. Attached...
Availability: In Stock
$1120
MFR Part #: 302
Samy's Part #: WESC302
The Westcott Reflector holder is designed for use with the 5-in-1 Reflector.
Availability: In Stock
MFR Part #: RS3139P
Samy's Part #: S-023356
The RPS Studio 3/8 to 1/4-20 Adapter converts a 3/8 inch male threaded screw to a 1/4 inch-20 screw. The adapter is made with highly reliable and strong brass metal for long life.
Availability: In Stock
$795
MFR Part #: F800
Samy's Part #: AVENF800
Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used.
Availability: Special Order
MFR Part #: KG004611
Samy's Part #: S-064970
This adapter consists of a baby receiver with a 3/8"-16 male thread attached to the top of it that can be mounted on any baby stud with a set-screw and knob to lock it firmly in place. It can be used to quickly mount a hot shoe flash with a Hot Shoe Adapter (KG006711) or a field monitor onto the...
Availability: In Stock
$1025
MFR Part #: RS3113
Samy's Part #: DOTLRS3113
$695
MFR Part #: 1100
Samy's Part #: WESC1100
Illuminator Arm, has a double ball-joint for exact positioning. The clip mechanism firmly grips the product frame and fits on any stand with a standard fitting.
Availability: In Stock
MFR Part #: 023
Samy's Part #: S-035544
The Manfrotto 023 Counter Balance Weight is a 10 lbs painted iron counter balance weight for use with 90417 yoke assembly, or any heavy duty boom or light stand.
Availability: Special Order
MFR Part #: BLH2
Samy's Part #: S-048523
The ProMediaGear Rigid Cage Tube Mount, 19mm-42mm Diameter for BLBP2 Profoto B2 Cage. The Tube Mount locks into a 1/4-20 threaded adapter and features 2 anti-rotation set screws. The #BLH2 can mount almost anything with a female 1/4-20 adapter to a tube or rail. The #BLH2 is machined out of high...
Availability: In Stock
MFR Part #: 429617
Samy's Part #: S-035547
The Matthews Junior Triple Header is especially useful when several light fixtures are needed in a relatively small amount of floor space. These headers are mounted on the light stand and allow four objects to be mounted on the Baby Double Header and five on the Baby Triple Header. The Junior...
Availability: Special Order
MFR Part #: 259567
Samy's Part #: S-061215
Ideal for low-angle shooting, the The Matthews The BabySitt'r Mini (2-Pack) contains two 11.75 x 9.75 x 1" wooden bases that accept two standard Baby plates each regardless of the length of the pin. Plates from most manufacturers are compatible. The optional plates mount securely to the BabySitt'r...
Availability: Special Order
MFR Part #: KG037511
Samy's Part #: S-068662
Ideal for mounting monitors in landscape or portrait orientation to grip gear with a 5/8" stud, the Kupo Super Knuckle VESA Monitor Mount Kit has a plate with four 75 x 75mm and 100 x 100mm holes for different-sized video panels. With a ball joint at each end, tilting the fixture is a snap, and...
Availability: In Stock
MFR Part #: 861832
Samy's Part #: S-028876
The Matthews Digital Imaging Technician Tray Kit media tray allows photographers, videographers, editors and DIT's to easily support media devices using industry standard tools. The new media tray will hold laptops including the popular MacBook Pro and MacBook Air series, or any other device within...
Availability: Special Order
MFR Part #: BLSAT
Samy's Part #: S-048517
The must have ProMediaGear 5/8 In. Stainless Steel Light Spigot Adapter for any photographer and videographer with ¼ top mounted screw. The 5/8" Stainless Steel Light Spigot mounts from the top down with a 1/4-20 screw allowing the adapter to be bolted onto cages, rigs, handles and countless other...
Availability: In Stock
$2495
MFR Part #: 026
Samy's Part #: MANF026
The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4"-20 threads, to adapt to light stands with top studs smaller than the standard 5/8".
FEATURES:
- Bracket tilts
Availability: In Stock
$4188
MFR Part #: 429599
Samy's Part #: S-016139
The Matthews 6 In. Pin with Collar is small and easy to keep in emergency kit; the 6 inch Pin with Collar can be mounted in a Grip Head, without fear of it slipping through the hole when a light fixture is attached. The pin is often used with a 40 inch Gobo Arm as a short light boom.
Availability: In Stock
MFR Part #: KG007512
Samy's Part #: S-064975
This is a small adapter that converts a 3/8"-16 female thread into a 1/4"-20 male thread.
Availability: In Stock
$285
MFR Part #: 426018
Samy's Part #: S-019557
The 24 in. Baby Stand Extension is a wonderful product by Matthews. When a Baby Lighting fixture needs to be just a little higher, the stand extension can be added to the top of the stand, nail on plate or other hardware. A light weight extendable version is also available.
Availability: Special Order
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE