CONTACT US AT 800-321-4726
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
Matthews
MFR Part #: 350612
Samy's Part #: S-006344

MICROgrip Master Kit, some accessories may not be shown.
Availability: Special Order
$52000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 350598
Samy's Part #: MATT350598

The Matthews Minigrip Kit consists of four 2" MiniGrip Heads with 3/8 and 5/8" mounting holes, two Mini Matthellini Clamps, and two 20" arms. The Minigrip Kit can be used with camera attachments and other accessories as well as lighting equipment. These miniature tools are ideal for tabletop...
Availability: In Stock
$28100
QTY
Matthews
MFR Part #: 350611
Samy's Part #: S-006343

A further development by Matthews from the MICROgrip series of products is the highly maneuverable and quite versatile on-camera light/monitor mouont. MICROmounts is a light/monitor mount utilizing two of the micro-gripheads and three lengths of 3/8in. rod to create a highly flxible mount. This...
Availability: In Stock
$19500
QTY
Manfrotto
MFR Part #: 098B
Samy's Part #: MANF098B

Wall mounted boom arm. 2 section.
Availability: Special Order
$17688
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 339759
Samy's Part #: MATT339759

Spring loaded turtle base for use with C-stand risers, chrome.
Availability: In Stock
$14200
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: 430127
Samy's Part #: MATT430127

The Matthews Hollywood Junior Offset Arm with 1-1/8" Receiver is a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set. The Baby Extendable Offset Arm terminates in double 5/8" pins and the...
Availability: Special Order
$13500
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Manfrotto
MFR Part #: 244N
Samy's Part #: MANF244N

Articulated arm. Features as 143N, but a large locking knob takes the place of cam-lever. Variable friction and locking of arm obtained by adjusting knob.

Please Note: Old inventory, New, but packaging may show signs of age.
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$12988
QTY
Matthews
MFR Part #: 429642
Samy's Part #: S-017988

The Matthews Double Matth Gag is the combination of two sets of Grip Head Plates on one shaft, and with one locking spin handle. It serves many pruposes, such as making a yoke with a Grip Head at each end or converting a Double Extension Arm to a Triple Extension Arm, feathering two Open End Scrims...
Availability: Special Order
$12500
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Manfrotto
MFR Part #: 244MINI
Samy's Part #: S-040051

The Manfrotto 244MINI Friction Arm is a versatile 24cm (9.4 ") friction arm with 1 /4" attachments on both ends and additional 3/8'' adapter included. Attachments can easily be replaced by using the included hex key and are compatible with a range of different adapters.

Features:
  • Versatile
...
Availability: In Stock
$12488
QTY
Manfrotto
MFR Part #: 244MICRO-AR
Samy's Part #: S-040052

The Manfrotto 244 Micro Arm with Anti-Rotation is a versatile 15cm (5.9") friction arm with interchangeable Anti-rotation attachments and additional 3/8'' adapter included. The Anti-rotation system is compatible with Manfrotto products including 055 series, 190 series, and 386B-1 Nano Clamp. The...
Availability: Special Order
Matthews
MFR Part #: 427000
Samy's Part #: MATT427000

Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: In Stock
Ships next business day
$11900
QTY
Kino Flo
MFR Part #: MTPLM
Samy's Part #: KINOMTPLM
Replacement Lollipop for Kino Flo Parabeam 400 Fixtures.
Availability: In Stock
$11500
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: 349581
Samy's Part #: MATT349581

Plates now feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New casting offers positive lock in all directions. The strongest and most popular 4-1/2" Grip Head in the industry.
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$10100
QTY
Notice: This item is non-returnable
SunBounce
MFR Part #: 710SWADUO
Samy's Part #: S-051279

Designed as an interface between a Sun Swatter and a boom stick or tripod, the SunBounce Swatty Duo Grip Head
is a simple and convenient means to safely hold or attach the Sun Swatter in windy conditions or when an additional pair of hands is needed on set. The grip head can accommodate all Sun...
Availability: Special Order
Matthews
MFR Part #: B655040
Samy's Part #: MATTB655040

The head on these arms now features two Holes 3/8" And 5/8", eliminating confusion. New castings offer positive lock inall directions. The strongest and most popular grip head inthe industry .
Availability: More Coming Soon
Order now and it will ship as soon as it arrives in the priority it is received.
Your card will only be charged once item has shipped.
$8100
QTY
Matthews
MFR Part #: 655040
Samy's Part #: MATT655040

The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it!
Availability: In Stock
Ships next business day
$8100
QTY
Avenger
MFR Part #: F900
Samy's Part #: AVENF900

The Avenger F900 Baby Triple Header allows you to mount as many as five light heads to one heavy duty light stand. It has five Baby (5/8") studs and one Baby receiver. Allows you to mount up to 5 fixtures.
Availability: Special Order
Westcott
MFR Part #: 5571
Samy's Part #: S-035326

The super durable and stable Westcott Illuminator Reflector Arm Extreme gives photographers the ability to mount their reflectors and boards effortlessly. With grip mounts located on both ends and a telescopic all-metal arm, the Illuminator Arm Extreme can precisely position the new Omega Reflector...
Availability: In Stock
Ships next business day
$7990
QTY
Matthews
MFR Part #: 655020
Samy's Part #: MATT655020

The head on these arms now feature two holes 3/8? and 5/8? eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip like other manufacturer?s products
Availability: In Stock
Ships next business day
$7600
QTY
Matthews
MFR Part #: B655020
Samy's Part #: S-045111

The Matthews Hollywood Head and Arm (20 In. Black) is made of Stainless Steel and T-Handles is ergonomically designed to allow for fast, efficient, safe tightening with little effort. The arm features with Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an...
Availability: Special Order
$7600
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 429596
Samy's Part #: MATT429596

The Matthews 6 In. C-Clamp with 5/8 Baby Pins has 2 separate 5/8" diameter pins at different angles so that the light fixtures may fit with minimal clearance. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures...
Availability: Special Order
Matthews
MFR Part #: 540015
Samy's Part #: S-025433

This Matthews Stem Head 2-1/2 In. Snap in Grip Head comes off at a right angle allowing it to be used on a vertical riser without a clearance problem. Its almost like a temporary XTA Head with an attached snap in pin.
Availability: Special Order
$7400
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
SunBounce
MFR Part #: C710200
Samy's Part #: S-009839

The Grip-Head GH-2522 "Enterprise" which will replace both the discontinued Grip-Head "The Pro" and "The Big". The Grip-Head Enterprise comes with several new and outstanding features. His two tunnel clamps are differently sized, and perfectly match both tube sizes which Sunbounce uses. Thus,...
Availability: Special Order
$7000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Kupo
MFR Part #: KG809012
Samy's Part #: S-019895

The Kupo Sidearm with Baby Pin Receiver is specifically designed to attach easily with C-stand's riser section to let you mount equipment at any point on your stand. It has a 5/8" male pin as well as a 5/8" female receiver at the endpoint of the arm to mount different tools without any adapters....
Availability: Special Order
Matthews
MFR Part #: B681012
Samy's Part #: S-039208

The Matthews 20 in. Hollywood Gobo Arm (Black) features the strongest & most popular Grip Head in the industry. Guaranteed to hold. Lock it; it will not slip. New castings offer positive lock in all directions. Plates feature 3/8" & 5/8" holes, eliminating confusion.
Availability: Special Order
$6200
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Westcott
MFR Part #: 6016
Samy's Part #: WESC6016

This is a complete Westcott Boom Arm that includes a tilt bracket to fit the top section of a heavy duty stand (diameter 1-1.25") stand. It also includes a 3.7lb adjustable counterweight.

Extends from 3.6' (1 m) to 6.3' (2 m)
Counterweight adjusts along the boom to balance each load applied
Availability: In Stock
$5900
QTY
Avenger
MFR Part #: D520L
Samy's Part #: AVEND520L

The Avenger D520L 40" Extension Arm is usually used in conjunction with a stand mounted grip head to gain reach and articulation via the arm's built-in grip head. This chrome-plated steel arm can hold a small light head, flag, or reflector.

Chrome-plated Steel and Aluminum Alloy
Permanently...
Availability: Special Order
$5799
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: D520LB
Samy's Part #: AVEND520B

This 40" C-Stand Extension Arm is capable of holding light heads, flags, reflectors, or a gobo.
Availability: Special Order
$5799
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Manfrotto
MFR Part #: 196B2
Samy's Part #: MANF196B2

A more versatile version with telescopic features that make this product even more compact than before. Allows easier positioning of lighting fixtures even in awkward and tight spaces. (Replaces the 2935 Articulated Arm).

Maximum Length is 23.8 inches, and the bottom 5/8" spigot (compatible with...
Availability: Special Order
$5688
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Kino Flo
MFR Part #: MTPLB
Samy's Part #: S-017198

The Kino Flo Lollipop with Baby Receiver fastens to a Kino Flo fixture, allowing mounting to a baby stud. The ball and socket mount allows the fixture to be oriented in a broad range of angles. There is also a shorter baby-stand mount and a 3/8 In. lollipop pin option. The yellow wire loops are...
Availability: Special Order
$5500
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Avenger
MFR Part #: D500LB
Samy's Part #: AVEND500B

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: Special Order
Avenger
MFR Part #: D500L
Samy's Part #: AVEND500

20" C-Stand Extension Arm provides an extended grip point for scrims and flags.
Availability: Special Order
$5199
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Matthews
MFR Part #: 681012
Samy's Part #: MATT681012

The Matthews 20 In. Hollywood Gobo Arm with Grip head features the strongest Grip Head in the industry. The grip guaranteed to hold firmly, just set it and forget, it will not let the arm to slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in...
Availability: In Stock
$5100
QTY
Notice: This item is non-returnable
Kupo
MFR Part #: KG203612
Samy's Part #: S-023637

The Kupo 40 In. Hex Grip Arm with Big Handle (Black) mounted on the end of a 40" piece of steel tubing 5/8" (16mm) in diameter. The surface of the tubing is painstakingly machined to create a rough texture to ensure a non-slip surface. The 2-1/2" grip head consists of a pair of rotating aluminum...
Availability: Special Order
$5095
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
Kupo
MFR Part #: KG203711
Samy's Part #: S-022335

Kupo is introducing 40 In. Hex Grip Arm w/Big Handle, an exciting innovation in grip arm design. At the end of our 40 In. grip arm, you will find a baby hex pin with six milled flat surfaces. Now, you can mount your light fixtures or accessories on the end of your grip arm like a mini boom. They...
Availability: In Stock
Ships next business day
$5095
QTY
Notice: This item is non-returnable
Matthews
MFR Part #: 3506021
Samy's Part #: S-006319

MICROgrip Base allows you versatility and flexibility with the MICROgrip kit - shoot tabletop photography and get the most out of your miniature work.
Availability: Special Order
$5000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]