MFR Part #: 100FH
Samy's Part #: S-063211
The Lee Filters LEE100 100mm Filter Holder - designed for photographers by photographers. You spoke and Lee listened. The risk of the Filter holder accidentally falling off has long been a concern for the Lee FK Holder, with the redesigned lock dial this holder will always stay safe and secure....
Availability: In Stock
MFR Part #: GSBW
Samy's Part #: LEEGSBW
Availability: In Stock
MFR Part #: FH100N
Samy's Part #: S-052460
The Benro 4 In. Filter Holder Set for 82mm Slim CPL Filter is an innovative aluminum filter holder used to control a polarizing filter, while there are disposed other filters. In addition to the polarizing filter, there is room for three different filters of 100mm wide and 2mm thick. This filt...
Availability: In Stock
MFR Part #: GSSFT
Samy's Part #: LEEGSSFT
Availability: In Stock
MFR Part #: GSTFL
Samy's Part #: LEEGSTFL
Availability: In Stock
MFR Part #: 4774B001
Samy's Part #: S-011986
The Canon 52mm Drop-In Circular Polarizer Filter works with Canon's super telephoto lenses. A small wheel exposed at the top of the filter allows rotation adjustment for specific lighting conditions.
Compatible With:
- Canon EF 300mm f/2.8L IS II
- Canon EF 400mm f/2.8L IS II
- Canon EF 400mm
Availability: In Stock
MFR Part #: GSH
Samy's Part #: LEEGSH
The Gel Snap is Lee's easy and affordable filter holder. Simply insert your 4 x 4" filter, snap it shut, and "snap" it on to any lens 82mm or smaller using the included "Elastomeric Tension Device", also known as an "E.T.D.", i.e, rubber band.
Availability: Special Order
MFR Part #: FM75
Samy's Part #: S-052453
The Benro 3 In. Filter System Kit includes FB75 holder with 67mm CPOL, tent, 4 stop ND, soft graduated 3 stop ND, and filter wrench, The Filter Case for 75mm Filters is a square filter bag made of 1680D nylon water resistant material. Separate compartments offer space for up to two 75mm square...
Availability: In Stock
MFR Part #: NIP100SKITIII
Samy's Part #: S-066329
The Nisi V6 Pro Starter Filter Kit III with Circular Polarizer Filter includes two filters that can be used individually or in various combinations to improve the results of your photography by preventing overexposure, as well as a circular polarizer to prevent distracting reflections or glare.
...
Availability: More In Transit
MFR Part #: NIP100AKITIII
Samy's Part #: S-066331
The Nisi V6 Pro Advanced Filter Kit III with Enhanced Circular Polarizer Filter includes five filters that can be used individually or in various combinations to improve the results of your photography by preventing overexposure, as well as a circular polarizer to prevent distracting reflections
Availability: More In Transit
MFR Part #: FH150T1
Samy's Part #: S-052667
The Benro Filter Holder Kit for Tamron SP 15-30mm f / 2.8 Di VC USD is designed to hold square 150mm filters, with the ability to freely rotate an attached separately available 150mm CPL filter after installation. The innovative aluminum filter holder is used to control a polarizing filter while...
Availability: Special Order
MFR Part #: NIP75PKIT
Samy's Part #: S-066313
The Nisi M75 75mm Professional Kit with Enhanced Landscape Circular Polarizer includes six filters that can be used individually or in various combinations to improve the results of your photography. Included are two neutral density filters that can be used to create a darkening of the entire image;...
Availability: More In Transit
MFR Part #: FM1072
Samy's Part #: S-052485
The Benro 4 In. Master Series Filter Kit includes Soft Grad 0.9 (3 Stops) ND WMC Filter 75x75mm, 82mm SHD WMC Slim CPL-HD Filter, Soft Grad 0.9 (3 Stops) ND WMC Filter 100x150mm, ND16 (4 Stop) WMC 100x100mm Filter, FB100S Case for 100mm Filters, Lens Filter Wrench Set and FH100 Tent. Soft Grad...
Availability: In Stock
MFR Part #: DLFW8286
Samy's Part #: S-044145
| The new DLC Heavy Duty Filter Wrench Sets feature all metal construction with a rubberized coating for a firm grip and to protect the surface of the lens and filter. Each set contains 2 wrenches. Available in 4 size ranges, 49-58mm, 62-67mm, 72-77mm, 82-86mm. |
Availability: In Stock
$2599
MFR Part #: CLFW4958
Samy's Part #: S-044142
The new DLC Heavy Duty Filter Wrench Sets feature all metal construction with a rubberized coating for a firm grip and to protect the surface of the lens and filter. Each set contains 2 wrenches. Available in 4 size ranges, 49-58mm, 62-67mm, 72-77mm, 82-86mm.
Availability: In Stock
$1299
MFR Part #: NIP75SKIT
Samy's Part #: S-066311
The Nisi M75 75mm Starter Kit with Pro Circular Polarizer includes four filters that can be used individually or in various combinations to improve the results of your photography. Included are two neutral density filters that can be used to create a darkening of the entire image; a medium-edge...
Availability: More In Transit
MFR Part #: G4
Samy's Part #: LEEG4
The Lee Filters Side Guides for 4mm Thick Filters (Foundation Kit) comes complete and accepts 2mm thick filters. You might want to modify it to take additional (or different thickness) filters. Lee offers special guides to accommodate your needs.
These 4mm side guides are intended for use with
...Availability: Special Order
MFR Part #: PRO100PRIMENDKIT
Samy's Part #: S-053984
The Tiffen Pro100 ND Prime Filter Kit with Solid Neutral Density 1.2 Filter contains a Pro100 Series Camera Filter Holder and one anodized aluminum-alloy adapter ring for attaching to a lens with a front filter thread diameter of 77mm. A compatible 4-stop, solid neutral density filter is also...
Availability: Special Order
MFR Part #: PRO100HDR77
Samy's Part #: S-047606
The sleek and innovative design of filter holder enables you to use up to two Tiffen Award Winning 4mm thick glass Motion Picture/Television filters at once, giving you the opportunity to create images like never before. Hold up to two 4mm thick motion picture quality Tiffen filters with Tiffen...
Availability: Special Order
MFR Part #: AR060
Samy's Part #: LEEAR060
Adapter rings fit into the lens to accommodate the filter holder. Once the adapter is in place the filter holder clips firmly to it using a smooth, quick-release, spring-loaded mechanism.
Sturdily constructed with an aluminum screw thread, the adapters are available in both standard and w...
Availability: In Stock
MFR Part #: PRO100NDSTRTKT
Samy's Part #: S-045782
The Tiffen PRO100 ND Starter Kit is designed for landscape photographers and videographers who want to enhance the quality of their images.
Availability: Special Order
MFR Part #: FH100H
Samy's Part #: S-052462
The Benro 4 In. Filter Holder Set for 95mm Slim CPL Filter is an innovative aluminum filter holder used to control a polarizing filter, while there are disposed other filters. In addition to the polarizing filter, there is room for three different filters of 100mm wide and 2mm thick. This filt...
Availability: Special Order
MFR Part #: PRO100LEXPKT
Samy's Part #: S-047403
The Tiffen PRO100 Long Exposure Kit is ideal for landscape photographers and videographers who are looking to experiment with longer exposures via Neutral Density filters. Additionally, this kit comes with an edge seal to allow users to control light spillage.
Availability: Special Order
MFR Part #: FH75
Samy's Part #: S-052442
The innovative aluminum Benro 3 In. Filter Holder with 67mm Lens Ring is used to control a polarizing filter, while other filters are in use. In addition to the polarizing filter, there is room for three other filters of 75mm wide and 2mm thick. This filter-holder kit for BENRO 75mm-67mm lens...
Availability: In Stock
MFR Part #: 4773B001
Samy's Part #: S-011976
Canon 52 Drop-in Filter Holder 52WII accepts 52mm Screw-in filters for EF 300mm f/2.8L IS II, EF 400mm f/2.8L IS II, EF 400mm f/4 DO IS II USM, EF 200-400mm f/4L IS USM Extender 1.4X.
FEATURES:
- Glass-backed holders
- Drop-in style
Availability: Special Order
MFR Part #: HF150
Samy's Part #: S-052682
The Benro Master Series 150mm Holder Frame HF150 without Lens Ring is similar to the 170mm holder designed for use with lenses that do not have filter threads. The lens opening on the 150mm filter holder measures 95mm across and it can be used with up to three square or rectangular filters measuring...
Availability: In Stock
MFR Part #: HF100
Samy's Part #: S-052463
The Benro 4 In. Holder Frame without Lens Ring is an innovative aluminum filter holder to control a polarizing filter, while there are disposed other filters. In addition to the polarizing filter, there is room for three different filters of 100mm wide and 2mm thick. These filter-holder kit for...
Availability: In Stock
MFR Part #: TA
Samy's Part #: LEETA
Availability: Special Order
MFR Part #: 147120
Samy's Part #: HOLG147120
Finally! An easy way to use filters with your Holga. This adapter slips easily over the lens of your Holga or Woca camera and stays firmly in place. No glue, hooks or tape needed. Specially designed filters slide easily into place. Expand your Holga universe and spur your creativity with this...
Availability: In Stock
$500
MFR Part #: DLFW7277
Samy's Part #: S-044144
| The new DLC Heavy Duty Filter Wrench Sets feature all metal construction with a rubberized coating for a firm grip and to protect the surface of the lens and filter. Each set contains 2 wrenches. Available in 4 size ranges, 49-58mm, 62-67mm, 72-77mm, 82-86mm. |
Availability: In Stock
$2399
MFR Part #: NIP100SKITPLUSIII
Samy's Part #: S-066330
The Nisi V6 Pro Starter Filter Kit III Plus with Enhanced Circular Polarizer Filter includes four filters that can be used individually or in various combinations to improve the results of your photography by preventing overexposure, as well as a circular polarizer to prevent distracting reflections...
Availability: More In Transit
MFR Part #: FH100
Samy's Part #: S-052459
Constructed from CNC machining aircraft-grade aluminum for durability, it uses ABS/PP resin spacers to protect your filters from scratching, and a sponge gasket prevents friction damage and light leaks. A calibrated scale on the holder's edge makes it easy to determine which areas are in light...
Availability: Special Order
MFR Part #: FM1077
Samy's Part #: S-052484
This Benro 4 In. Master Series Filter Kit gets you started with filter holder and CPOL, 2 drop in filters, tent, and filter wrench. Comes with the bag to hold it all. By temperature fluctuations or contamination of the threads, it can sometimes be difficult to unscrew screw filters, especially...
Availability: In Stock
MFR Part #: GSFCT
Samy's Part #: LEEGSFCT
Availability: In Stock
MFR Part #: GSMAG
Samy's Part #: LEEGSMAG
The Magenta Color Compensating Polyester Filter Set with Gel Snap Holder kit consists of the following filters: CC05M, CC10M, CC20M, CC25M, and CC30M. They are supplied ready-mounted for use in the Lee Filter Holder. This set also contains the Lee Gel Snap. The Gel Snap is Lee's easy and affordable...
Availability: In Stock
MFR Part #: CLFW6267
Samy's Part #: S-044143
The new DLC Heavy Duty Filter Wrench Sets feature all metal construction with a rubberized coating for a firm grip and to protect the surface of the lens and filter. Each set contains 2 wrenches. Available in 4 size ranges, 49-58mm, 62-67mm, 72-77mm, 82-86mm.
Availability: In Stock
$1799
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2020 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE