CONTACT US AT 800-321-4726
Triggersmart Kit
Triggersmart Kit
Quantum Instruments

Quantum Instruments Triggersmart Kit

MFR Part #: UK1
Samy's Part #: S-019478
  • Triggersmart Kit Image 0
Availability: In Stock
Select Size:
Notice: This item is non-returnable



Items Included

Rate & Review

The smart way to trigger your camera using light, sound and motion! The Quantum Instruments Triggersmart Kit which contains the UK15 Control Unit and is the heart of the system. It connects to all sensors and cameras, allows fine tuning of trigger delay, sensitivity and shooting sequence. It can be battery or AC powered. Contains the MCT-1 Controller, IR/LIS Receiver, IR Transmitter & Sound Sensor, two Mini Tripods, two control cables, one trigger cable and 2 degree baffle.
  • Three-way Camera Trigger
  • Sound, Light and IR Beam Triggers

TRIGGER TIME:  Selectable for 5ms (1/200 sec.) to 5 seconds

DELAY TIME:  Short delay 1ms (1/1000 sec.) to 100ms (1/10 sec.) - Long delay 1000ms (1/10 sec.) to 10 seconds.

TRIGGER MODES:  Manual, auto 1 shot, auto re-arm.

FOCUS ACTIVATION:  Manual activation.

SENSOR MODES:  Flash, infra-red beam, sound.

IR BEAM:  Range 20cm to 2m. Wavelength 850 nm.8 degrees or 2 degrees with focal baffle.

FLASH SENSOR:  Range 1 to 1500 lumens. Sensitivity 10 lumens.

SOUND RESPONSE:  Microphone sensitivity frequency response 50 to 5000 Hz.

TRIGGER OUTPUTS:  x3 open collector (x2 trigger, x1 focus). 50 v DC max at 100 milliamps.

POWER REQUIREMENTS:  x4 AA batteries, high power type, non-rechargeable - AC to low voltage PSU 6 to 9 VDC at 100 milliamps. MP1 Mains power unit recommended.

POWER CONSUMPTION:  About 40 milliamps. When IR TX module is connected this rises to 80 milliamps.

SIZE:  Controller - (W)19cm x (D)14cm x (H)5cm Sensors (W)7.5cm x (D)5cm x (H)2.6cm.

SENSOR MOUNTING:  1/4 inch UNC thread (standard tripod thread).

MINI TRIPOD HEIGHT:  8 cm min. 17 cm max. WEIGHT:
MCT-1 Controller 325g. Sensors 43g. Tripods 33g. Kit 950g.

TEMPERATURE:  0 to 35 degrees C (operating). -10 to 50 degrees C (non-operating).

Connection to camera: Many cameras will connect to the TriggerSmart MCT-1 with the cable provided in the kit. Some cameras will need other dedicated cable connections.

Customers Also Browsed

  • Control Panel for Orbiter
    Arri - Control Panel for Orbiter
  • WR-1 Wireless Remote Control Transceiver
    Nikon - WR-1 Wireless Remote Control Transceiver
  • Air Remote TTL-F for Fujifilm
    Profoto - Air Remote TTL-F for Fujifilm
  • Air Remote TTL-O for Olympus
    Profoto - Air Remote TTL-O for Olympus
  • Air Remote TTL-S for Sony
    Profoto - Air Remote TTL-S for Sony
  • Air Remote TTL-N for Nikon
    Profoto - Air Remote TTL-N for Nikon
  • Air Remote TTL-C for Canon
    Profoto - Air Remote TTL-C for Canon
  • Air Remote Transceiver
    Profoto - Air Remote Transceiver
  • Strobe Wizard Plus Radio Remote Control System
    Hensel - Strobe Wizard Plus Radio Remote Control System
  • SkyPanel Remote
    Arri - SkyPanel Remote
  • FC-WR Wireless Radio Flash Commander
    Olympus - FC-WR Wireless Radio Flash Commander
  • FA-WRC1M Wireless Radio Commander
    Sony - FA-WRC1M Wireless Radio Commander
  • MCT-1 Controller
  • IR/LIS Receiver
  • IR Transmitter & Sound Sensor
  • 2 - Mini Tripods
  • 2 - control cables
  • Trigger cable
  • 2 Degree Baffle
Be the First to write a Review.
See any errors? Let us know.
Copyright © 2021 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.