CONTACT US AT 800-321-4726
 
Shop By Category
Filter By
FOUND: 0
SORT BY:
# PER PAGE:
MFR Part #: GPC-DJI-P4-PRO-1
Samy's Part #: S-050608

The Go Professional Cases Compact Carrying Case for DJI Phantom 4 Series fits the Phantom 4, Phantom 4 Pro or Phantom 4 Pro+ and up to 7 batteries (including in the P4), iPad Air 2 or iPad Mini, filters, charging hub, SD card storage and more. Designed with the professional in mind who is out...
Availability: In Stock
MFR Part #: IB-18650-26
Samy's Part #: S-046933

The ikan Lithium-Ion Battery (3.7V, 2600mAh) is a lithium series battery, perfect for gimbals operation and LED lights. It features integrated overcharging / discharging protection circuit which makes it long life. Each battery is factory tested for quality and serviceability. It produces 3.7...
Availability: In Stock
MFR Part #: AAGCC-001
Samy's Part #: S-048795

The GoPro Karma Grip Case is a case for karma grip made of weather-resistant exterior shell and a custom molded interior. It is a compact and lightweight solution to carry your karma grip on the location.

Features:
  • Compact and lightweight case for karma grip
  • Made of weather-resistant exterior
...
Availability: In Stock
MFR Part #: IB18650263PK
Samy's Part #: S-046934

The ikan Li-Ion Battery for Gimbals and LED Lights (3 Pack) comprises on universal rechargeable batteries, perfect for DS1 gimbals, LED lights and other high drain devices. The integrated battery features overcharging and discharging protection circuit with no memory effects. Each battery in the...
Availability: In Stock
MFR Part #: CP.MA.00000038.01
Samy's Part #: S-058700

Replace your dead batteries or stock up for long shoots with the DJI Intelligent Flight Battery for Mavic 2
. This battery has a 3850mAh and 59.29Wh capacity that delivers enough power for up to 31 minutes of flight time. Built into the battery is DJI's Intelligent Battery Management System. This...
Availability: Available for Pre-Order
MFR Part #: GPC-DJI-RONIN-M
Samy's Part #: S-044672

The Go Professional Cases Hard Case for Ronin-M Gimbal & Accessories is for the filmmakers needing quick deployment! The GPC Ronin-M case allows you to only have to break down into only 4 easy pieces. Setup time is drastically reduced, because the gimbal stays in balance from the last shoot even...
MFR Part #: CP.BX.000202
Samy's Part #: S-050210

The DJI TB50 Intelligent Flight Battery for Inspire 2 Drone / Ronin 2 uses higher performance and a higher density battery cell with an overall larger capacity as well as an updated management unit. Its performance in low temperature environments has been optimized with a built-in 70W self-heating system
...
Availability: In Stock
MFR Part #: CP.ZM.000384
Samy's Part #: S-045242

The DJI Remote Start/Stop is designed to be used with a Ronin series gimbal or DJI Focus to control the camera for video recording or taking photos. When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record...
Availability: In Stock
MFR Part #: AGMSS-001
Samy's Part #: S-048791

Combine the GoPro Karma Grip Handle with the Karma Stabilizer to capture breathtaking shake-free video with your GoPro. Enjoy professional, cinema-quality footage whether youre hiking, biking or chasing your kids through the park. Works with most GoPro mounts to capture the amazing handheld, g...
Availability: In Stock
MFR Part #: CPPT0000022201
Samy's Part #: S-057753

Attach the 
DJI Propeller Guards for Tello to your Tello drone to help prevent collision damage to the drone or to surfaces the drone may come in contact with. A full set of four is included.
Availability: On Backorder
MFR Part #: CP.MA.00000037.01
Samy's Part #: S-058699


The DJI Mavic 2 Fly More Kit includes two Intelligent Flight Batteries, a Mavic 2 Car Charger, a Battery Charging Hub, a Battery to Power Bank Adapter, Low-Noise Propellers, and a Mavic 2 Shoulder Bag, providing you with comprehensive support during shooting.

Both Intelligent Flight Batteries

...
Availability: Available for Pre-Order
MFR Part #: ZH33DPART42
Samy's Part #: S-037709

The DJI ZH3-3D Damping Rubber Set is used to connect the camera mounting plate and the gimbal while decreasing vibration effects.

Features:
  • Connects the camera mounting plate and the gimbal
  • Decreases vibration effects
Availability: In Stock
QTY
Notice: This item is non-returnable
MFR Part #: CP.ZM.000245
Samy's Part #: S-044804

Built for use with the Osmo Intelligent Battery.

Input: 100-240V, 50/60Hz
Output: 12.6V, 1.2A
Availability: On Backorder
QTY
Notice: This item is non-returnable
MFR Part #: CP.ZM.000280
Samy's Part #: S-044137

The DJI Triple Mount Suction Cup Base for Osmo is specially designed for Osmo System to replace the Triple Mount Suction Cup Base on the Vehicle Mount. 1/4" screw thread allows users to attach different tools and accessories, like the Extension Rod.
MFR Part #: CP.ZM.000140
Samy's Part #: S-034798

The DJI Ronin Cable Pack (Part 33) features an assortment of cables used to connect various components that go with the

DJI Ronin Gimbal Stabilizer.

$4000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: CP.PT.00000079.01
Samy's Part #: S-054693

The DJI Low-Noise Quick-Release Propellers Mavic-Series Drones (Golden, Pair) have a brand new aerodynamic design giving the Mavic Pro series an impressive noise control performance. When used with the Mavic Pro Platinum, up to 4dB (60%) of aircraft noise is lowered during takeoff and landing,...
Availability: On Backorder
MFR Part #: CP.ZM.000370
Samy's Part #: S-045866

The DJI Osmo Intelligent Battery is designed specifically for the Osmo, the Intelligent Battery provides pack of 980mAh of power with intelligent battery-saving features. Recharge using the Osmo Intelligent Battery Charger.

Features:
  • A high-performance intelligent flight battery
  • Specifically
...
Availability: In Stock
MFR Part #: CP.ZM.000378
Samy's Part #: S-049565

A High Capacity Osmo Intelligent Battery reaches 1225mAh (14.1Wh) and 11.55V. Use a DJI charger to recharge intelligent batteries
Availability: In Stock
MFR Part #: CP.PT.000343
Samy's Part #: S-046259

The DJI Battery Charging Hub for Phantom 4 is designed for use with the Phantom 4 Intelligent Flight Battery. When used with the Phantom 4 Battery Charger, it can charge up to three Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power...
Availability: On Backorder
MFR Part #: CP.MA.00000039.01
Samy's Part #: S-058701

The 
DJI Battery Charger for Mavic 2 can recharge both the battery for the Mavic Air and the remote controller via the main output. A secondary USB output is available for charging your mobile device or smartphone. This replacement charger does not include an AC cable, and requires one for connecting...
Availability: In Stock
MFR Part #: CP.ZM.000136
Samy's Part #: S-034797

The DJI Dovetail Mounting Plate B for Ronin (with universal groove and camera screws) is a sliding plate required when mounting certain cameras to the gimbal.

$10000
QTY
Notice: This item is non-returnable
Special Order
Call to Order: 1-800-321-4726
MFR Part #: MVC-5001
Samy's Part #: S-050657

The Polar Pro Filter Kit for DJI Mavic Pro (3-Pack) includes a Circular Polarizer filter for reducing glare and increasing color saturation, an ND8 filter for reducing shutter speed for partly cloudy days, and an ND16 filter for filming on sunny days. Each neutral density filter for the DJI Mavic helps...
Availability: In Stock
MFR Part #: CP.PT.00000077.01
Samy's Part #: S-054692

The DJI Intelligent Flight Battery for DJI Mavic Pro Platinum is a 3830mAh LiPo rechargeable Battery for DJI Mavic Pro Platinum drone. It is a new generation intelligent flight battery to extend your flight times without any delay for batteries to recharge. This high performance battery offers...
Availability: In Stock
MFR Part #: cpma0000006101
Samy's Part #: S-058714

The DJI 
Gimbal Protector for Mavic 2 Pro is designed to protect the gimbal and the Hasselblad 20MP camera from impacts, dust, water, and debris when the drone is flying or during transport. Please note that the gimbal protector will need to be removed if full gimbal movement is desired during...
Availability: In Stock
MFR Part #: CPPT0000002021
Samy's Part #: S-056956

Specially made for the Mavic Air. This set includes ND4, ND8 and ND16 filters. ND filters reduce the amount of light coming into the sensor, giving you the freedom to create your work by allowing more control of the camera's aperture, exposure time and sensor sensitivity settings. Put more simply;
...
Availability: In Stock
MFR Part #: CP.ZM.000301
Samy's Part #: S-046865

The DJI Ronin Series Battery Power Distributor is designed for the Ronin series hand-held gimbals, this Battery Power Distributor has a P-Tap power connector that can supply power to the gimbal and other onboard devices (such as a RED camera). The power connector is easy to connect and remove....
MFR Part #: CP.PT.000377
Samy's Part #: S-046873

The DJI Car Charger for Phantom 4 Drone is used to charge the Intelligent Flight Battery or remote controller through a car's cigarette lighter port. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low...
MFR Part #: CP.ZM.000159
Samy's Part #: S-045244

The DJI Wireless Thumb Controller for Ronin is simple to setup and use, the DJI Ronin Wireless Thumb Controller (Including an additional external receiver) makes controlling your Ronin easier and more intuitive, even with only a single operator. Capture shots that are difficult or impossible now,...
Availability: In Stock
QTY
Notice: This item is non-returnable
MFR Part #: CP.ZM.000524
Samy's Part #: S-054989

The DJI Focus Handwheel 2 for Inspire 2 and Osmo is especially optimized to precisely control aperture, focus or zoom on Inspire 2 and Osmo Pro/RAW cameras conveniently. The precise adjustments without vibration are made possible with it.
MFR Part #: CPPT00000033.01
Samy's Part #: S-055392

Professional aerial imaging benefits from longer flight times with DJI Intelligent Flight Battery for Phantom 4 Pro/Pro+ (Obsidian Edition). The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO 4 app shows battery lifetime...
Availability: In Stock
MFR Part #: CP.EP.000052
Samy's Part #: S-041554

This pair of DJI 1345s Quick Release Propellers are designed as replacement propellers for the DJI Inspire 1 Quadcopter. The pair includes one clockwise propeller and one counter-clockwise propeller. When properly installed, the quick release propellers won't loosen during flight and can be removed...
Availability: In Stock
MFR Part #: CP.ZM.000217
Samy's Part #: S-047390

The DJI 2.4 GHz Receiver for Ronin Thumb Controller is a receiver module to receive control signal from the Wireless Thumb Controller. It accompanies a connection cable and mounting adhesive for connecting to the quadcopter.
Availability: In Stock
QTY
Notice: This item is non-returnable
MFR Part #: P4002
Samy's Part #: S-041211

The DJI Inspire 1 Pro Filters are PolarPro's most advanced filters to date using ultra high definition glass and the most advanced multi-coating process available. The Zenmuse X5 MFT 15mm filter engineering is designed to be as lightweight as possible to ensure smooth gimbal operation. Unlike...
MFR Part #: CPPT000002131
Samy's Part #: S-057751

The
DJI Battery for Tello is a replacement battery for the Tello drone. This rechargeable lithium-ion polymer battery will yield an approximate 13-minute flight time on a full charge.
Availability: In Stock
MFR Part #: CP.BX.000222
Samy's Part #: S-053143

Created for outdoor aerial imaging, the DJI CrystalSky High-Brightness Monitor (5.5 In.) features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control. A maximum 2000...
MFR Part #: CP.ZM.000095
Samy's Part #: S-034787

The DJI Ronin Dovetail Plate for RED, Canon, Blackmagic, and Nikon is a sliding plate required when mounting certain cameras to the gimbal on a quadcopter. It works with select cinema cameras from RED and Blackmagic Design, as well as DLSRs from Canon and Nikon, and finally the cinema camera line...
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2018 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
]