MFR Part #: RS-1145
Samy's Part #: S-022074
The RPS Studio 6 ft. Medium Boom Stand & Arm has a 2-section adjustable boom arm, a 3-section light stand, a connecting knuckle, and a fillable sand bag with connecting ring
Availability: In Stock
MFR Part #: RS3135
Samy's Part #: S-033407
The new RPS Studio BoomPole Holder is designed to allow a standard handheld boom pole or extension pole to be mounted to a grip head. The BoomPole Holder is coated to protect the boom pole and features a 3-1/2" long 3/8" diameter stainless steel shaft with an extra long yoke to permit easy pos...
Availability: In Stock
$2795
MFR Part #: RSRC1010CKG
Samy's Part #: S-013691
The RC series of muslin backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As with their other muslin bac...
Availability: In Stock
MFR Part #: RS4003
Samy's Part #: DOTLRS4003
A high tech design in reflectors gives this kit a big quality improvement over older style reflectors that have been on the market for years. This design eliminates concentric circles and hot spots resulting in vastly improved light quality and thus, final picture quality. Additionally, each kit...
Availability: Special Order
MFR Part #: EPCCFL30W
Samy's Part #: S-015923
These energy saving, photographic quality, cool burning, low cost lamps are 5500°K. There are 6 wattages available, 30 watt, 35 watt, 45 watt, 70 watt, 105 watt and 150 watt.
Availability: Special Order
MFR Part #: RSRC1010GY
Samy's Part #: S-054907
| The RPS Studio 10 x 10 ft. Cloth Muslin Photography Background (Photo Gray) is designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good |
Availability: In Stock
MFR Part #: RS6055
Samy's Part #: S-020198
The RPS Studio 20x20x20 Lighting Tents are supplied with both a carry pouch and and interior blue background. Easy to set up...just “pops” into position. Flatten, twist, and fold to reinsert in zippered storage pouch. Great for all reflective objects: glass, coins, silver, gold, etc. Creates a...
Availability: In Stock
$3995
MFR Part #: RS1130
Samy's Part #: S-022024
The new RPS Studio Handheld Boom Arm Kit gives the photographer the best of two options in one boom arm: the ability to work in the studio or out at an event location. It can be used handheld by an assistant or it can be mounted on to a stand. The boom arm has a 12 In. padded grip with finger...
Availability: In Stock
MFR Part #: RS1058
Samy's Part #: S-004299
A lite weight stand for small strobes and light weight lampheads. Ideal for speedlites, photofloods, and smaller monolites.
Availability: In Stock
$1995
MFR Part #: RS1068
Samy's Part #: S-005585
Medium weight stand for easily supports most monolites strobes and lampheads. Heavier diameter tubing for aded strength.
Availability: In Stock
$2995
MFR Part #: RSRC1010W
Samy's Part #: S-013692
The RC series of muslin backgrounds are designed to be a lower cost alternative to RPS Studio standard muslin material. Although these value backgrounds have a smaller thread count they still have a weight and stiffness that is expected of a good muslin material. As with their other muslin bac...
Availability: In Stock
MFR Part #: RS3149
Samy's Part #: S-024784
This larger version of the popular RPS Studio Large Uneven Mounting Arm features more distance between the left and right shoes. Its additional height of 3rd shoe is in the middle. It features complete locking foot with 1/4-20 female thread and is made of metal. The arm measures approximately...
Availability: In Stock
$2995
MFR Part #: RS3147
Samy's Part #: S-022020
The RPS Studio Accessory Rail 12 In. are black anodized aluminum and will accept standard accessory feet. It is a very useful and a good quality Rail by its manufacturer RPS Studio. The double locking foot can be set anywhere along the bottom side of the rail and it also allows the rail to be...
Availability: In Stock
$2795
MFR Part #: RS3997
Samy's Part #: DOTLRS3997
This 85 watt bulb equals 500 watts incandescent light output and gives a consistant 5200 degreeK color temperature. Average bulb life is 7000 hours.
Availability: In Stock
$3995
MFR Part #: RS3700
Samy's Part #: S-007863
The RPS Studio Speedlite BeautiDish Kit has everything needed for dramatic flash pictures with your speedlite. The basic system comes with a 12" dish, one translucent and one aluminum deflector, and a fabric diffuser. Also included is all the hardware necessary: mounting bracket with tilt, retaining...
Availability: Special Order
MFR Part #: RS8512
Samy's Part #: S-004868
These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
$999
MFR Part #: RS-331TC/C
Samy's Part #: S-042551
The RPS Studio TTL Transceiver for Canon Style Speedlights is a spare or replacement receiver for the RPS Studio Wireless TTL Remote Kit. It is specifically designed for Canon E-TTL II to wireless control of speedlights and remote triggering of monolights. The system utilizes a frequency of 2.4 GHz and...
Availability: Special Order
MFR Part #: RS3500D
Samy's Part #: S-002421
This diffuser for speedlites features the well recognized design of a softbox and produces the soft, big light that softboxes are famous for resulting in a significant improvement in the quality of flash pictures taken with it. Eliminates harsh shadows and produces a more natural result. Designed...
Availability: In Stock
$999
MFR Part #: RS4070
Samy's Part #: S-000454
This folding softbox kit is excellent for digital photography. A snap to setup or close, the softboxes have no ribs or adapters...everything is built-in. The kit includes 2 quick folding 20x20" softboxes, which expand quickly and easily, like an umbrella, plus a built-in socket for use with fl...
Availability: Special Order
MFR Part #: RS8514
Samy's Part #: S-004869
These straight cords are primarily used to connect studio flash units such as monolites or accessory flash units, speedlites, for DSLR's to RF type wireless trigger systems such as the Pocket Wizard. Made of the finest materials for long and dependable service, they feature molded strain reliefs...
Availability: In Stock
$1199
MFR Part #: RS1040
Samy's Part #: S-038310
The RPS Studio Light/Copy Light Compact Stand is excellent for copy stands, or for low background lighting. It can extend up to 16 inches maximum and closes down to 9.5 inches. The stand has two sections and it can hold up to 5.5 lbs maximum load.
Availability: In Stock
$1095
MFR Part #: RSRM1N10
Samy's Part #: S-007209
The RPS Studio 3-in-1 Wireless Remote Control is a very versatile wireless trigger that can be used to release the shutter of a digital camera up to 300 feet away or fire a studio flash such as a monolite or an accessory camera flash up to 100 feet away. It is powered by 1, 23A battery (included)...
Availability: Special Order
MFR Part #: RS1099
Samy's Part #: S-008888
This heavy duty dolly works equally as well with tripods or light stands. The rests for the feet of the legs of either a tripod or light stand are adjustable up to 17" from the center. The foot locks adjust up to 2". Thus, this dolly will work with almost any tripod or light stand. The 3" wheels...
Availability: In Stock
MFR Part #: RSRT04C3
Samy's Part #: DOTLRSRT04C3
This RS-RT04/C3 RF Remote Release from RPS is a wireless radio remote that works with Canon EOS 7D, 5D, 5D Mark II, 10D, 20D, 30D, 40D & 50D digital cameras and similar cameras which use a 3-pin connector. It consists of two parts; a receiver/trigger that connects to the camera's cable release
Availability: Special Order
MFR Part #: RS0445P
Samy's Part #: DOTLRS0445P
These heavy duty TTL cords are designed to fit Canon Digital cameras that use dedicated flash units. They feature a molded shoe on one end that slides onto the camera hot shoe and locks to prevent accidental dislodging of the shoe. A second shoe mounts onto a flash bracket or light stand via either...
Availability: In Stock
$2795
MFR Part #: RS2000
Samy's Part #: S-003828
This portable background support features metal collars with an aluminum crossbar and uprights with a black finish to cut down on reflections. The air cushioned uprights have three sections with the diameter of 33mm for the largest section. The uprights extend from 44 inches to 120 inches (10...
Availability: More In Transit
MFR Part #: RS3102
Samy's Part #: S-007073
The heavy duty LightBar is designed to accept up to 4 speedlites and, if desired, wireless releases, LED lights or quartz lights. It features metal construction with a tilting umbrella holder. The umbrella holder has a saw-tooth design for the tilt feature assuring a secure positioning of the...
Availability: In Stock
MFR Part #: RS1150
Samy's Part #: S-004573
General purpose counterweight can be used with any light stand or boom. Includes "Hi-Vis" yellow stripes so it is easy to see in a darkened studio, prevents accidents. Sandbag has two pockets which can be filled with sand to produce the proper counterbalance effect (sand not included.) Also...
Availability: In Stock
$1995
MFR Part #: RS0420C3
Samy's Part #: DOTLRS0420C3
The RPS Studio Digital Flash Bracket combines many features desired for flash photography while incorporating features that have not been available to the photographer doing flash photography with a digital SLR.
The first feature is an included electronic shutter release. This two position release...
Availability: Special Order
MFR Part #: RS4012D
Samy's Part #: DOTLRS4012D
$799
MFR Part #: RS3110
Samy's Part #: S-001564
This 3-section extension pole is perfect for those situations where a light stand is not practical. It is especially useful for event photography. The pole features a non-slip hand grip with guard. The top has a 1/4-20 threaded post on top of a 5/8" diameter spigot. Each section has a flip type...
Availability: In Stock
$3795
MFR Part #: RS2024
Samy's Part #: S-022023
The RPS Studio Background Wall Mount is a heavy duty background holder made of metal and mounts to wall studs or ceiling joists. Arms are 1-5/8 In. wide and vary in length from approximately 5-1/2 In. to 8 In. long to allow background material to easily move up and down. Overall length of the...
Availability: Special Order
MFR Part #: RSHCSET
Samy's Part #: S-007074
This creative kit is designed to fit all of the popular speedlites including TTL flash units for DSLR's on the market today allowing the photographer to improve the quality of his or her flash shots and create dramatic effects. The RPS Studio Speedlite Accessory Kit features 3 HoneyComb Grids,...
Availability: Special Order
MFR Part #: RS0446HDN
Samy's Part #: S-030336
The new RPS Studio 1.5M TTL Cord For Nikon SC-30 is a full function TTL cord that allows a Nikon speedlight to be removed from the camera's hot shoe and used off-camera, usually resulting in better pictures. Full TTL function is maintained.
The key feature of this cord is that it has built in an...
Availability: In Stock
MFR Part #: RS4015
Samy's Part #: DOTLRS4015
This unique, 16 in. diameter heavy duty lamphead features even light distribution and fits any standard lightstand. This unit is perfect for digital photography. Three ceramic E-27 screw lamp sockets accepts three 26 watt 5000°K spiral fluorescent bulbs.
Delivers light equal to 360 watts inca
...Availability: Special Order
MFR Part #: RS8517
Samy's Part #: S-009219
This is RPS Studio 16" Pocket Wizard 3.5mm to 2.5mm Mini Sync Cord
Availability: In Stock
$1395
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE