CONTACT US AT 800-321-4726
MFR Part #: 756020
Samy's Part #: MATT756020
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from...
Availability: In Stock
MFR Part #: 319167
Samy's Part #: S-038301
The Matthews 20x20 ft. Green/Blue Digital Screen is made of the best fabric on the market today. HD shooters will find this surface particular attractive to work with since they won't need as much wattage for their shoots. Matthews 20x20 are sized industry-standard approximate measurement of 1...
MFR Part #: 259535
Samy's Part #: MATT259535
Apple Boxes are some of the handiest tools to have on the set or in the studio. Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. They are precisely made, supported in the center, and dimensionally...
MFR Part #: 861862
Samy's Part #: MATT861862
CNC machined from 6061T-6 aluminum billet, Matthews now offers the strongest, most versatile and compact monitor bracket available. Because it is not a casting, this bracket will support any size monitor that does not exceed 65 lbs (20 kg). Works with light stands, C-stands, or any other mounting...
Availability: On Backorder
MFR Part #: 388210
Samy's Part #: MATT388210
In the few short years that the Magic Finger has been out in the market, it has become one of the most popular grip accessories of all time. The 5/8" pin attached to the ball joint pivots from -15deg. to +90deg. while the collar rotates 360 deg. All axis lock positively with the one locking handle....
Availability: In Stock
MFR Part #: 299559
Samy's Part #: MATT299559
The Matthews 15 lb Sandbag Filled (Black) is used for securing the base of light stand and set wall and when you need extra weight to prevent tipping. The sand bags become essential part of your setup especially when the weight is off center, such as with a heavy Scrim. The bags help stabilize...
MFR Part #: 339763
Samy's Part #: MATT339763
The Matthews Back Light Stand is configured so that accurate positioning of the back light may be achieved. Used for either background illumination or back lighting the subject. An extendable column allows for a wide range of heights and an interchangeable 5/8" pin positions the light almost...
Availability: In Stock
MFR Part #: B387489
Samy's Part #: S-013244
The Matthews 7.5 ft. MERF Mini Extendable Reverse Stand is a small, robust light stand with reverse folding legs. A new concept in small, robust kit stands which features a secure clamping system that eliminates T-Handles. Stuff it into your backpack or small portable lighting kit. When you get...
Availability: In Stock
MFR Part #: 319403
Samy's Part #: MATT319403
Availability: On Backorder
MFR Part #: 756040
Samy's Part #: MATT756040
Includes FREE 6 In. Pin with Collar
Availability: In Stock
MFR Part #: B756040
Samy's Part #: MATTB756040
Includes FREE 6 In. Pin with Collar
Availability: In Stock
MFR Part #: 427801
Samy's Part #: MATT427801
Similar in construction to the Mini Boom this boom utilizes a much heavier duty tilt locking device and can be mounted on a stand with either a Junior Receiver or a Baby Pin.
Availability: In Stock
MFR Part #: 861833
Samy's Part #: S-028884
This clever Matthews 3/8 To 5/8 Baby Adapter allows you to make quick changes to your equipment and gives you the option to convert 3/8 to 5/8 threaded system to mount your equipment with lot more options.
Availability: In Stock
MFR Part #: 756140
Samy's Part #: MATT756140
This is a Matthews Century C Plus Stand with 40" Arm and griphead. This stand consists of a 40" three section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag.
The unique staggered leg design...
Availability: In Stock
MFR Part #: B756140
Samy's Part #: MATTB756140
This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip, and a Hollywood Arm that can hold a small light fixture, gobo, or flag.
The unique staggered leg design of a C Stand allows it to be nested and placed...
Availability: In Stock
MFR Part #: 339775
Samy's Part #: S-053412
C-Stands are a necessity, but anyone that has worked on a small or traveling production knows that carrying a few can be an awkward burden. Until now the industry has lacked a well thought out and durable solution. Matthews, the company that invented the C-Stand has taken its years of experience...
Availability: On Backorder
MFR Part #: 339776
Samy's Part #: S-053413
The Matthews C-Stand Rolling KitBag for 3 Stands (Black) is designed to make traveling with C-Stands a pleasure. The bag can accommodate 3 Removable base C-Stands and features built-in, high density silicon skate wheels. It has zippered external compartment for Matthews Road Rags kit and custo...
Availability: In Stock
MFR Part #: 329040-1
Samy's Part #: MATT3290401
The Matthews Sound Blanket with Grommets (6.25x5.6 ft.) is used to blackout a window or hang in a room when added sound insulation is needed. Sound Blankets can also be used to protect equipment during transportation. This model has 12 grommets, four on each side.
Features:
- Dimensions: 6.25
MFR Part #: 339574
Samy's Part #: MATT339574
The Matthews 20 In.Century C Stand With Spring Loaded Base is a important component in the image maker's arsenal of tools. The Matthews 20" Century Double Riser stand assists the motion picture, television, and photographic professional in lighting. This 20" C stand features a spring loaded base,...
MFR Part #: 540011
Samy's Part #: MATT540011
The Double Super Mafer allows the use of two Mafer attachments with one clamp. The castings and the reformulated protective pads in the jaws are now strong enough for us to be able to make this Double Super Mafer Clamp. Use a Hollywood Superflex Arm at one end and a 5/8" Baby Pin with a light...
Availability: In Stock
MFR Part #: 420113
Samy's Part #: S-006347
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allows you to extend the grip of any Matthellini center jaw clamp by up to 10" (25.4 cm). Just remove the removable jaw from the Matthellini clamp, thread the end of the Extendellini into the end of the
Availability: In Stock
MFR Part #: 169062
Samy's Part #: MATT169062
The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In...
Availability: In Stock
MFR Part #: H377574
Samy's Part #: MATTH377574
Roller Stands or Overhead Stands as they are often called utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on locations and supporting large backdrops in studios these stands feature wide bases for stability and terminate in the new 4 .5" Grip Head. Both the Hi-Hi...
Availability: On Backorder
MFR Part #: 350602-11
Samy's Part #: S-041446
MICROgrip by Matthews is introduced as the newest line of grip and mounting products developed especially for the motion picture, television and photographic production industries. This broad range of products has been developed around the micro-griphead with only a 1.25 inches (32mm) diameter...
Availability: In Stock
MFR Part #: 63302
Samy's Part #: S-043272
The Matthews 5/16 In. Knurled T-Knob is a replacement for one of the knobs that come with lighter weight stands without brass braking.
Availability: In Stock
MFR Part #: B387487
Samy's Part #: MATTB387487
Designed primarily for use in lighting kits, this stand is compact and light weight. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures.
Availability: In Stock
MFR Part #: 350620
Samy's Part #: S-018599
Matthews Universal Tablet Mount kit is designed to hold any size Tablet or iPad it's the perfect on-set or in-office accessory for ease of use. Whether you're on location, on set, or at your desk, the Matthews Universal Tablet Mount (Basic Kit) or 'MUT' provides a simple yet reliable mounting...
MFR Part #: 299859
Samy's Part #: MATT299859
Matthews uses steel shot instead of lead to fill these black Cordura bags.
MFR Part #: 415168
Samy's Part #: S-007229
Matthews Car Mount Systems integrate the MICROgrip technology along with the recently introduced Matthews family of ball heads to provide the professional camera person a very strong, versatile and reliable system for mounting cameras to automobiles, trucks, boats, trains, and even low flying...
Availability: In Stock
MFR Part #: 415174
Samy's Part #: S-011362
The Matthews Magic Riser is the latest addition to the Car Mount series of products. Matthews Magic Riser will allow you extended flexibility to your camera positioning that other car mount systems do not offer - a full 9" to 14" of travel to precisely position the camera in almost any desired...
MFR Part #: 350621
Samy's Part #: S-017565
Whether you're on location, on set, or at your desk, the Matthews Universal Tablet Mount or 'MUT' provides a simple yet reliable mounting solution for your tablet or iPad, regardless of the model. The 'MUT' allows Tablet or iPad users to mount their device with or without a protective case, as
MFR Part #: 427000
Samy's Part #: MATT427000
Suction Cups have 5/8" pins, in single and double configurations. The 10" Pump Cup is a heavy duty style without 5/8" pins. Pump it until a red marker disappears to create an amazing bond to non porous surfaces. A common use is for camera shots on car hoods in conjunction with the 4 Way Tilt Plate.
Availability: On Backorder
MFR Part #: 159015
Samy's Part #: MATT159015
Please Note: This item ships freight only
The Matthews Solid Frame Scrim White Artificial Silk (48x48 In.) is a handy accessory to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames...
Availability: In Stock
MFR Part #: 409312
Samy's Part #: MATT409312
Matthews now offers the Snap-A-Part frames for easy handling and storage. Simply 'snap apart' the frames for breakdown and storage in your grip and lighting truck. Snap-A-Part frames come in both light and heavy duty 1" square tubing. The Matthews Butterfly Overhead Snap-A-Part Light Duty Frame...
Availability: On Backorder
MFR Part #: 435196
Samy's Part #: MATT435196
Stainless wire diffusion is impervious to rust and holds up better under uneven intense heat making it preferable for use with open face non freznel lighting fixtures. May be stacked to achieve limitless variation of light intensity.
The 7-3/4" Pancake Gel Frame provides an effective alte...
MFR Part #: 350595
Samy's Part #: MATT350595
Matthews Road Rags are a portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. The elastic corded frames easily fold for storing and transporting. A simple...
Availability: In Stock
PAGE 0 OF 0 | 0 OF 0
CALL US TOLL FREE AT 1-800-321-4726 FOR CUSTOMER SERVICE & ORDERING.
Copyright © 2019 Samy's Camera All rights reserved. Terms & Conditions | Privacy & Security Policy
Price, images, specifications and descriptions of items are subject to change without notice. We are not responsible for typographical or photographical errors. Rebates & conditions, and expiration dates from manufacturers are subject to their authorization.
POWERED BY NOX ENTERPRISE COMMERCE